T-Handle Hex Wall Holder Allen Key Holder Bahco and others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for the Bahco T-Handle Allen Keys. I'm sure it will fit others too.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
On the side of the 70mm version, there is a place to put a 7mm Allen key (the one which is never included, in any set, and one day you will need it. If you have one, you don't know where you put it - that's why there is a special place for it).
The model consists of two parts, which are the same, but mirrored.
There are also places for 1.5mm, 2.0mm and 2.5mm which are not part of the T-Handle set.
Magnets are:
60x10x5mm for the large tools (however - if I measure them, they are more like 56.7x9x4.3) let me know if I need to adjust
10x5x2.5mm - for the small tools (stacked 6x per tool). These do not seem to be very common, but there are other options - available, eg. 20x5x2mm