Mac Studio Stand , Raiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightwight mac studio M4 Series to raise 40mm and holding external storage and hubs under
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I searched most of the designs, and they're about dust and etc. I need 40mm height to be able to hide the external storage and hubs under it. Also, the goal was to be able to print it in less than 2 hours.
You can edit the CAD on Onshape. Feel free to modify it as you need.
https://cad.onshape.com/documents/af6e19cbe677f5fe20ce4543/w/05dbabccccde3d7c02e7844b/e/6188ab6ff3486f4e4e731bc9?renderMode=0&uiState=69543eaf377e14429f24890c
As for settings, I printed with PLA, 0.4 nozzle, and 0.2 layer height. As you know, with a large area, Z offset is really important—at least in the top 5 layers. So, I just printed 1 layer wall on the bottom with 0.2 mm and 1 mm for top surfaces.
its ±60 ~ 70 gram