Mac Studio Stand , Raiser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightwight mac studio M4 Series to raise 40mm and holding external storage and hubs under
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I searched most of the designs, and they're about dust and etc. I need 40mm height to be able to hide the external storage and hubs under it. Also, the goal was to be able to print it in less than 2 hours.
You can edit the CAD on Onshape. Feel free to modify it as you need.
https://cad.onshape.com/documents/af6e19cbe677f5fe20ce4543/w/05dbabccccde3d7c02e7844b/e/6188ab6ff3486f4e4e731bc9?renderMode=0&uiState=69543eaf377e14429f24890c
As for settings, I printed with PLA, 0.4 nozzle, and 0.2 layer height. As you know, with a large area, Z offset is really important—at least in the top 5 layers. So, I just printed 1 layer wall on the bottom with 0.2 mm and 1 mm for top surfaces.
its ±60 ~ 70 gram