Ender 3 Dual X motors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Addes a second X axis motor on the other side of the gantry.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Does this make any sense to do?
no
Then why?
funy
I dont really reccomend most people do this, i just had the parts laying around.
IF you also think its funny and want to make it, make sure you have 2 z lead screws as the stock single one cant support the extra weight. You will also need an extra motor driver and a longer belt.
Hardware needed:
1 Stepper and pulley
3 m3x35
4 m3x30
3 m3x4x5 heatset inserts
1 m4 nut
1 m4x35 hex head bolt
2 m5x60 to replace the stock m5x45 on the v wheels
I did this in combination with the dual y axis motors mod and now I run standard voron print profiles at 10-20k acceleration, youll probably want less than that for cleaner prints but if you are doing this mod you want to go fast :)