Ender 3 Dual X motors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Addes a second X axis motor on the other side of the gantry.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
Does this make any sense to do?
no
Then why?
funy
I dont really reccomend most people do this, i just had the parts laying around.
IF you also think its funny and want to make it, make sure you have 2 z lead screws as the stock single one cant support the extra weight. You will also need an extra motor driver and a longer belt.
Hardware needed:
1 Stepper and pulley
3 m3x35
4 m3x30
3 m3x4x5 heatset inserts
1 m4 nut
1 m4x35 hex head bolt
2 m5x60 to replace the stock m5x45 on the v wheels
I did this in combination with the dual y axis motors mod and now I run standard voron print profiles at 10-20k acceleration, youll probably want less than that for cleaner prints but if you are doing this mod you want to go fast :)