1 / 4
CALIPER DRO FOR 8IN JR SOUTHBEND LATHE — zdjęcie 1
1 / 4

CALIPER DRO FOR 8IN JR SOUTHBEND LATHE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

CALIPER DRO FOR 8IN JR SOUTHBEND LATHE

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Caliper base for use as a DRO (Digital Readout). The base comes in two parts and requires no additional supports. You will need two M3x10 screws, two M3 nuts, and eleven 10x2mm round neodymium magnets.

You will need to modify the caliper to fit. Cut off the depth gauge (red arrow) and leave only the spot-welded section to continue serving as a guide.

Also, cut off the tips.

Tagi