1 / 4
CALIPER DRO FOR 8IN JR SOUTHBEND LATHE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CALIPER DRO FOR 8IN JR SOUTHBEND LATHE
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Caliper base for use as a DRO (Digital Readout). The base comes in two parts and requires no additional supports. You will need two M3x10 screws, two M3 nuts, and eleven 10x2mm round neodymium magnets.
You will need to modify the caliper to fit. Cut off the depth gauge (red arrow) and leave only the spot-welded section to continue serving as a guide.
Also, cut off the tips.