Counting matching models…
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
Printable speaker grill for audio projects. Designed to fit Pride Diamond 8 V2, but they should fit many other speakers (tested also with Rockville RXM 84). I've printed mine with ABS so they won't deform under higher temperatures.
Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
This is a case for waveshare ESP32S3 2.8 inch Display case. With speaker grill, screw, Memory card slot,buttons vent. https://www.waveshare.com/esp32-s3-touch-lcd-2.8.htm
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 3/8in Ratchet…
I have a number of these Waveshare 1.28inch LCD Modules that I want to build things with. This is the base piece for holding one of these screens. I've printed with PLA and PETG. Amazon Link:…
This is my 3/8in drive gridfinity socket holder for 10-19mm shallow and deep sockets. I used Husky brand sockets (Home Depot) for measurements but there is a bit of extra clearance so other brands may fit. For text filament swaps at…
A Gridfinity socket holder for 3/8in drive SAE/Imperial/American sized sockets. One model has “SAE” for the text, the other has a more whimsical 'MURICAN stamp, as seen in the cover photo. Holds 7/16 thru 7/8 sized sockets in 3/8in drive.…
A desktop caliper stand for 8 inch calipers (works ok for 6 in), designed using Generative Design tools in Fusion360. Prints nicely using Prusa's organic supports. I've printed several of these now for myself and coworkers from both PETG…
This should fit most Fords with the stock 6x8 speaker and adapt it to the more common 6.5in speaker. Fasteners: This uses M4 or M3 threaded inserts to hold the speaker in place. There is a 2mm 60 degree chamfer on the opening for the…
Small modification of original model, lager hole added, since my screen have extra usb-c port for power and data. Also link to Onshape, if you want to modify it more:…
8" Push Mower Wheel STEP file has 3 parts for no support printing as well as multi-material printing. Axle - No Bearing required (some sort of lubricant helpful) Diameter: 13.5mm (0.53in) Depth: 32mm (1.26in) Direct front 8" wheel…
These are storage trays for different common end mills that were designed for the Gridfinity organization system by ZackFreedman. If you want to see a video of how they work, check out my video on them: Storage Types: CNC Bit Cases (Loose…
Pipe support clamp for 3/4in nominal type L copper pipe with a pocket to hold 3/8in-16tpi nut to allow attachment to threaded rod and wall support. Prints best with the “pipe axis” orthogonal to the build plate, with supports enforced for…
I modeled my own version of a standard Bahtinov focusing mask. The general profile for the structure was generated automatically using the following free online utility: http://astrojargon.net/maskgen.aspx (link broken, unfortunately) I…
Vaccum hose adapter 1-7/8in to 2-1/2in for shopvac
Features Perfect Fit: Precisely dimensioned cradle ensures a snug, wobble‑free fit for the Waveshare ESP32-S3 1.8inch AMOLED Touch Display module. Integrated USB‑C Port: Built‑in cut-out accepts a NOTOW Elbow USB-A to USB-C 90° braided…
A Sanding Block that use 75 x 457 mm abrasive belt (3 X 18 inches) Print the following 5 parts : Body-A, Body-B, Lever, Pin, Spacer+0 This Sanding Block will accommodate most 75 x 457 mm abrasive belt (3 X 18 inches). You may need to…
The Paperwhite is very light weight but very hard to hold. These grab bars solve the problem. I liked these 2 designs, but they didn't work for me. They inspired me to create a new model.…
A gridfinity bin for my Mitutoyo Calipers (500-197-30). Click here for an Affiliate link! It also has storage for the Mitutoyo 6"/15cm Steel Rule . The top part will work in PLA, but i printed it in Overture TPU . The bottom part was…
We started demolition on our bathroom for a remodel after the kids went to bed and found that one of our sink valves had gone out and was dripping. It's after midnight, the stores are closed. So... I looked up the schematics on a cap,…
There are no doubts that bottle openners are the most useful key chain tools ever :-) But I have allways been thinking about mixing it together with phone stand that I allways miss when needed most! Additionally, I added some other cool…
The extensions and ratchet holder will likely work with other brands. The sockets are mostly for Husky sockets.
The model was designed to be printed at 75% scale for a 47mm (1.8in) diameter Kong tennis ball. At 75% scale, the two parts are connected together using: Square Head Screw; ¼"-20 Thread, 1-½" Long (McMaster-Carr Part Number: 91465A107)…
A little socket holder that I mainly use for grouping random/loose sockets in my toolbox and for grabbing small sets of sockets to carry around (hence the 'pocket socket' name) when working on something specific. It keeps me from having…
English version: Welcome to the Fan Upgrade Kit for the Antminer L3/L3+! These high-quality 3D print files allow you to replace the original fans of your Antminer L3/L3+ with a powerful 200mm fan. With this upgrade, you can improve the…
12GA Channel Strut 1 5/8in. x 1 5/8in. designed for use with modeling accessories or hardware. Compare to: https://www.lowes.com/pd/Adamax-Adamax-12-Gauge-Channel-Strut-EG-10-FT/5001905073 CAD models attached.
Keep your grease in your wheel bearings I Printed with .12 mm layer height, 100% infill, and 3 walls so it would be ridged enough to preform its designed task.
The silver model here was printed in PLA with 0.20mm layers but 0 top and bottom layers to let the infill show thru.
Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3 and its Power Supply. With this flange you can easily hang it on the wall or anywhere else. Creality Cloud…
Fits a 3/8in drive 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm and 21mm socket. One model is the full organizer, then the other 2 models are it split in half to fit on a standard size printer.
Used magnets: 10mm x 2mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters. These are quicker and easier to print but…
This is a taller version of the 8in Pumpkin Box that can be used to store about double the candy! Print Instructions: Print in Vase Mode with any layer height you want. I usually choose the coarsest layer height allowed for my nozzle with…
Long Version: Fixed internal geometry to remove leftover edges that could cause uneven internal feed surface when printed at fine layer heights ( Added additional 8th filament pathway to accommodate use with the ChromaPrint System Short…
These are Voron V0.1 Tophat Panel clips remixed and optimized for 3mm (~1/8 in") thick polycarb/acrylic panels found in the US. The slots for the panels were sized up from the initial 1.5mm to 3mm so that there will be a better fit. They…
For assembly - requires 1-inch dowel: - x1 455mm length; - x1 445mm length; Such length allows for two brackets to be built out of a 6-foot, 1-inch dowel!
This is the 8" version of the Tubular frame. 6" version: https://www.thingiverse.com/thing:5368370 7" version: https://www.thingiverse.com/thing:5365636 If you plan on building one or would like to get more info, there is a Discord server…
I have a 48in New Age Pet Mojave terrarium & needed something to help anchor a rope 'ladder' to the side of the terrarium, so I designed this ledge to fit into the slots on the side of the terrarium.
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
A simple holder for the Mi x Wiha 8in1 screwdriver / ratchet for skadis boards. Uses 2 slots. prints without support on the bottom site
Makers of all sizes, need a good printer.
Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3. With this flange you can easily hang it on the wall or anywhere else.…
Full instructions on how to create your own Minions pumpkin with animated eye on my website. https://johnzanussi.com/posts/minions-pumpkin-animated-eye#part-2-how-to
Monitor stand I created for my work desk. It's made to accommodate a 2mm-thick carbon fiber sheet. The sheet shown in the pictures is 400mm x 300mm x 2mm. The shelf surface is 8in off of the desk. Original document in Onshape:…
Replacement fan blades for Lasko 18in fan and similar models. Print fan hub using supports, only on build plate. x1 Print fan blades, orient flat on build plate. x4 Print both completely solid with any material. ABS OR PETG recommended.…
Tool to remove SR Suntour top caps for service. Changed to a 3/8in square drive, and added wrench flats for adjustable
I've bougth SKYRC B6neo 2 charger (awesome thing!) that comes with 8-in-1 charging cable and was shocked that the cable does not have any caps so it is very easy to short curcuit when charging batteries. So I modelled caps for most of the…
This project's scope was to catch drips from children's wet hands operating the faucet and optional soap dispenser. The design is for an 8" spacing Moen Eva faucet but could work for other 8" faucets. The soap dispenser tray was designed…
A 3/8" Metric Socket Tray for short sockets. The range covered is a little broken, but covers my key sizes. Holes for socket sizes: 11, 12, 13, 16 and 17mm I hope you can find this print useful, too. Print instructions To make the print…
Added holes in back DDU so screen can fit on the front of Moza R9/R12 base. Utilized 2x M6x20 Hex screws.
1x3 Gridfinity bin for Mitutoyo 8in Caliper. Remixed from Gridfinity Caliper Holder by Zach Freedman.
Tri-Bahtinov Mask for Meade LX85 ACF 8inch F10 SCT Category: 3D Printing
I was replacing the Delta faucet cartridge for our single handle kitchen sink and the instructions specified a 1-5/16 six point socket. I tried to buy one at Lowes and Home Depot stores locally, but they did not have that size. I then…
A 1.8in 7 segment display enclosure for your gear indicator for your sim rig
Waveshare 2.8in round screen mount to mount it to the Delonghi ECP3630 Espresso machine. Should also fit on other Delonghi ECP Machines, but unsure. Print is broken into 3 parts for ease of printing I print the Outer adapter on it's face…
A holder for the Waveshare ESP32-S3 1.8inch Knob - https://amzn.to/4gCaa6p I installed a flight tracker on it with ADS-B I printed in ASA just because I have a lot of it. 25% infil No supports needed
The William Bounds, Ltd. HM 8in Professional Pepper Mill is a wonderful device. However, after a number of years of excellent service, the plastic core within the stainless steel cap fractured, rendering the mill difficult to use. The…
Allows direct connection of 6in AC hose to 8in VEVOR inline fan. Small dia side fits inside the AC hose, large side fits outside the rim of the fan intake. Designed to friction fit to allow quick connection. OnShape Link This is part of…
passend für: https://www.amazon.de/gp/product/B081YGDBG7/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1 Category: Gadgets
Simple, easy print. No supports required. The pegs print separately and are simply glued in the slot with your favorite adhesive. I used CA glue and activator and it has held up beautifully. The letters are raised at the top so you can…
Simple, easy print. No supports required. The pegs print separately and are simply glued in the slot with your favorite adhesive. I used CA glue and activator and it has held up beautifully. The letters are raised at the top so you can…
Welcome, my conventional non-conventional visitors! (RIP Tim Curry <3) Here's my 3D-printable mod to fit a larger battery pack into this Waveshare kit. It reuses the stock screws to secure the board and route the connector into the…
The TTGO TS has a built-in MPU9250, a display and a BMS. I made this to house it and mount it to my car so I can log data in a small form factor. https://github.com/TanmayChhatbar/car_datalogger
Caliper base for use as a DRO (Digital Readout). The base comes in two parts and requires no additional supports. You will need two M3x10 screws, two M3 nuts, and eleven 10x2mm round neodymium magnets. You will need to modify the caliper…
Assembly Instructions: Link: https://bit.ly/kirby-nendoroid Extras: 24 x D3H1 Magnets ( https://www.kjmagnetics.com/d3h1-neodymium-disc-magnet ) 48 x D32-N52 Magnets ( https://www.kjmagnetics.com/d32-n52-neodymium-disc-magnet ) 2 x 12in…
Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.
Replacement rod joint for this cheap 120cm/48in acrobatic kite. Original joints are easy to lose, so here is replacement.
The TTGO TS has a built-in MPU9250, a display and a BMS. I made this to house it and mount it to my car so I can log data while driving autocross. https://github.com/TanmayChhatbar/car_datalogger
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x3x3u Gridfinity Socket Holder for the Metric 3/8in Sockets and Wobble Extension from the - Harbor…
I will add printed Photos once they come off the printer. A simple bolt together expansion stand about 8in tall. There is also options for a 2in or 4in and center bowl stand spacer. All parts are made to be either right or left depending…
Friction fits to 8in VEVOR inline fan intake. Allows the direct connection of (x2) 4in flex hose on the sides. The central port is sized to accept the 6in AC hose intermediate coupler (it is not designed to accept 6in hose directly, it is…
We needed a light weight protective cover to go over a fiber harp to protect it during shipping, handling, and for installation. This is for the miniSciFi fiber harp used on the muon g-2 experiment at Fermilab. https://muon-g-2.fnal.gov/
Useful if you want to have a nice little try for 8x6x3 mailer boxes, this is the 3rd revision. i also have the files for the dividers but figured the empty version would be best to upload first. Recommended 2-3 walls and 2-3 top surface…
passend für: https://www.amazon.de/gp/product/B081YGDBG7/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1 Category: Gadgets
A laptop stand that raises the laptop around 20 cm or 8 inches.
Just made the A,B,C,D 3 panels 8 inches tall so the tubes wouldn't hit the top lid. Used these with the taller top panel
Pretty self explanatory
Bahtinov Mask - Meade LX85 ACF 8inch F10 SCT Category: Hobby
Skate guard for blades lengths 16-18 inch, comment on how to improve! BTW I do short track speedskating
English version: Welcome to the Fan Upgrade Kit for the Iceriver KS1/KS2! These high-quality 3D print files allow you to replace the original fans of your Iceriver KS1/KS2 with a powerful 200mm fan. With this upgrade, you can improve the…
I picked up a water pump that attaches to a battery powered drill. It uses a waterhose input and output. So I wanted to make it get as much water from my floor as possible, so I made this print to go on the end of my waterhose and let it…
I use a Losmandy AZ8 Alt/Az mount for visual observing and when not using the slow motion controls on the mount I found I didn't like to push on the telescope itself when star hopping. Stellarvue for some time made a handle (MH002) for…
A mount for a Furman SS 6B power strip on the side of a Harbor Freight Yukon 48in Workbench with light
Same style prism adapter, just adjusted to fit a 5/8"x11 thread (15.875mm OD).
Wanted a quicker way to use the Comfort Clean function on my Triflex HX2 vacuum. The adapter fits on any 3/8in square socket adapter. I'm using a 3/8in to 1/4in hex bit adapter to use it in my drill (see pics) Print as oriented below: At…
Printable speaker grill for audio projects. Designed to fit Pride Diamond 8 V2, but they should fit many other speakers (tested also with Rockville RXM 84). I've printed mine with ABS so they won't deform under higher temperatures.
Assembly Instructions: Link: https://bit.ly/kirby-nendoroid Extras: 24 x D3H1 Magnets ( https://www.kjmagnetics.com/d3h1-neodymium-disc-magnet ) 48 x D32-N52 Magnets ( https://www.kjmagnetics.com/d32-n52-neodymium-disc-magnet ) 2 x 12in…
Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.
Tri-Bahtinov Mask for Meade LX85 ACF 8inch F10 SCT Category: 3D Printing
Bahtinov Mask - Meade LX85 ACF 8inch F10 SCT Category: Hobby
Just made the A,B,C,D 3 panels 8 inches tall so the tubes wouldn't hit the top lid. Used these with the taller top panel
Keep your grease in your wheel bearings I Printed with .12 mm layer height, 100% infill, and 3 walls so it would be ridged enough to preform its designed task.
1x3 Gridfinity bin for Mitutoyo 8in Caliper. Remixed from Gridfinity Caliper Holder by Zach Freedman.
A fan duct for the Bitmain Antminer S21 Pro & S21 XP models with an exhaust diameter of 8 inches / 20 cm. Since these models sport two 140mm fans, the model is quite large. So there is a two part version included, both parts fit on a…
It helps you organize your tinier parts. It has counter sunk holes for your screws.
Its just a cup. I don't know if you should drink out of it though. Certain PLA could be harmful.
perfect for plays and props, did this in Tinkercad so it reached the height limit. File is a lil different Add supports
