1 / 5
Sanding Block for 457mm sanding belts (18in) — image 1
1 / 5

Sanding Block for 457mm sanding belts (18in)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sanding Block that use 75 x 457 mm abrasive belt (3 X 18 inches)

Rating
4 / 5
Likes
34
Downloads
156
Makes
1
Views
1,143
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

A Sanding Block that use 75 x 457 mm abrasive belt (3 X 18 inches)

Print the following 5 parts : Body-A, Body-B, Lever, Pin, Spacer+0

This Sanding Block will accommodate most 75 x 457 mm abrasive belt (3 X 18 inches). You may need to print an alternate spacer to perfectly fit your brand of sanding belt.

This model print without support as there is virtually no overhang. 

Fit ans clearances: The pin is intentionally loose, it will be retained by the abrasive belt when in place. The adjusting spacers should hold by friction in the B-part. An ejection hole is in place to remove the adjusting spacers if required. The A and B parts are tight but should slide without effort. A well calibrated printer should have no problem. If you have difficulties, you can print an alternate B part that is looser in the optional folder. 

65 x 410mm remix : https://www.printables.com/model/1285164-schleifblock-65-x-410mm

This model is free. If you wish to tip me or support me, you can do so at this link: https://www.printables.com/model/773888-infinity-calander

Please leave comments and suggestions, I do actively maintain this model.

Tags