1 / 2
Stadia Controller Holder for HSW with M3 Insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A holder for the Stadia Controller that is compatible with the Honeycomb Storage wall.
I liked Jzoor's model, but I don't have threaded inserts or a way to insert them into the printed model, so I remixed it with a hole going all the way through so you can use a M3 screw and nut with the M3 HSW insert.
Printing
3 walls with 0.2 mm layer height on a 0.4 mm nozzle worked for me with no problems. 10% infill, no supports.
Assembly
Insert a M3 nut into the M3 HSW insert, then put a 14 or 16 mm M3 bolt through the holder and screw them together.