1 / 2
Stadia Controller Holder for HSW with M3 Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Stadia Controller Holder for HSW
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 19
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A holder for the Stadia Controller that is compatible with the Honeycomb Storage wall.
I liked Jzoor's model, but I don't have threaded inserts or a way to insert them into the printed model, so I remixed it with a hole going all the way through so you can use a M3 screw and nut with the M3 HSW insert.
Printing
3 walls with 0.2 mm layer height on a 0.4 mm nozzle worked for me with no problems. 10% infill, no supports.
Assembly
Insert a M3 nut into the M3 HSW insert, then put a 14 or 16 mm M3 bolt through the holder and screw them together.