1 / 5
Reolink Atlas PT Ultra Hood — zdjęcie 1
1 / 5

Reolink Atlas PT Ultra Hood

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protect the body and connectors from rain and sun.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
89
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This hood was designed to protect the body and connectors from rain and sun. It also provides a place to stash excess solar panel wire.

This design is parametric and many aspects of it can easily be modified. See Parameters for more info.

I printed with usual 0.20 mm layer height. The hood does not require any infill at the default 2mm thickness. Supports are only be needed for the notch area, if used.

Tagi