1 / 1
Helmet/bucket cooling 5015 size fan to tubing adapter — zdjęcie 1

Helmet/bucket cooling 5015 size fan to tubing adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to allow 2 5015 fans to cool a helmet.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
104
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is for cooling cosplay helmets. It uses a 5015 size fan, this print, 1/2" ID tubing, and a 1/4 NPT or BSP (threads are BSP) to 1/2" ID tubing adapter. That tube can then be routed, or have holes drilled in it to maximum effect to cool your head. A second fan on the other end will maximize this, or one fan, and a plug.

The tube fitting could be printed, but I found that to have the walls thin enogh to not impede flow, it was too fragile. The molded parts are better.

Using high flex cut to fit tubing means I don't have to make a manifold for multiple helmet designs. 

I hope I have selected the correct licensing. I intend for this to be aproved for comercial use with attribution.

This is a Fusion 360 designed part, I have included the 3MF.

Tagi