Helmet/bucket cooling 5015 size fan to tubing adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to allow 2 5015 fans to cool a helmet.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Share Alike
This is for cooling cosplay helmets. It uses a 5015 size fan, this print, 1/2" ID tubing, and a 1/4 NPT or BSP (threads are BSP) to 1/2" ID tubing adapter. That tube can then be routed, or have holes drilled in it to maximum effect to cool your head. A second fan on the other end will maximize this, or one fan, and a plug.
The tube fitting could be printed, but I found that to have the walls thin enogh to not impede flow, it was too fragile. The molded parts are better.
Using high flex cut to fit tubing means I don't have to make a manifold for multiple helmet designs.
I hope I have selected the correct licensing. I intend for this to be aproved for comercial use with attribution.
This is a Fusion 360 designed part, I have included the 3MF.