dmax rear passenger cupholder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a quick design I made for my first gen dmax that clip onto the back of the centre console. doesn't work if you have lid
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
a quick design I made for my first gen dmax that clip onto the back of the centre console. doesn't work if you have a centre console lid. you need 2 m6x20 bolts with a socket head on them. print in asa or similar material as pla with fail inside of a vehicle. the cupholder itself can be printed without supports just flat on the bottom. the mount you should print on its skinny side for correct strength. these are designed to easily fit most big cups even yeti. while I designed it more a dmax it's pretty universal and the mount easily changed.