150 modeli
Colorado, USA (CO) Topographic Relief Map with Rivers and Coastal Waters Colorado, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
As any Colorado or Canyon truck owner knows, the first must have accessory is a tray/organizer to make the cavernous center console space a little more useful. This tray covers the entire console area for models without the USB charger…
Gauge pod based of a 3D scan of the factory vent for the Chevy Colorado. PLA wont hold up, PETG, ABS, etc should be fine. UPDATE: Slightly thickened to prevent warping.
At this point there have been enough success reports that I think it's safe to say this fits most trucks with fairly wide slots for 2x8" bed dividers. Known good list is below. I'm sure there is a reason the Chevy Colorado has about ½" of…
Its 2022 and the Colorado Avalanche win the Stanley Cup and only takes 15 minutes for them to drop it and dent the bottom! This 150mm (5 7/8in) replica celebrates their championship!! Its is broken up into multiple pieces to account for…
🇺🇸 Welcome to Denver, Colorado! 🔵🔴🟡 🏔⛏ This model was made by Dany Sánchez . The Capitol of the State of Colorado, in the United States, is the house of the legislative and judicial powers of the State. It was built in the late 1800's,…
This is a collection of trays for the 2015 and above Chevy Colorado. There are very few (no?) commercial trays custom to the Colorado and since the Colorado does not have a sunken ridge most generic trays interfere with the closure of the…
The wireless chargers on many new vehicles don't work for sh!t unless the coils are aligned properly. The 2023+ 3rd gen GMC Canyon/Chevy Colorado chargers are no exception. This is a custom spacer I drew up to fit in the tray and center…
With driving on a lot of muddy, dusty, and snowy roads I wanted a way to keep junk off the capless fuel filler. I drew this up in Fusion360 and printed it in TPU. The cap slips over and the holder uses a small piece of double sided tape…
These objects were fitted on a 2022 Chevy Colorado. They should fit all “Generation 2” 4x4 Colorado and GMC Canyon trucks. There are two versions: Note that the 4x4 Knob Lock object is different in each version and NOT interchangeable.…
This mount conforms to the dashboard and tray contours of the 2015 and above Chevy Colorado and GMC Canyon. There's room for double-sided tape on the back of the mount in the tray area and in the front of the mount on the stereo fascia -…
Pgobel's original tray, but with a spot cut out of the corner for models with the USB in the center console.
I made this as a quick 3d logo and it prints pretty well in PLA -
There's no cabin air filter on these trucks. There's just a big hole. This adaptor installs over the hole to allow you to install the included paper air filter. It includes the adaptor, one replaceable paper filter, and the bolt/nut/wedge…
Needed more space for my water canister and regular drinks. Made this dual cup holder to add an additional space for a third drink. Made the dual cup holder in three pieces in order to make printing easier. No support needed. Print…
This is an adjustable glovebox organizer for 2015–2022 Chevrolet Colorado and GMC Canyon trucks. You will need to print: 1 Top; The Full model (355mm x 194mm) is only if you'd like to cut it a different way than the pieces provided. The…
This is simple wrench for removing/tightening the fuel filter housing cap on a Holden RC Colorado and Isuzu DMax (2008-2011), where the filter is located underneath the vehicle next to the LHS chassis rail. The wrench has a hex nut of…
Colorado Avalanche keychain, classic logo
No adhesion, supports may be required
this is for a chevy colorado - cup holder insert for looks and function - use the infill pattern to make yours custom- i made mine honeycomb
It surprises many that GMC/Chevy doesn't offer a built-in garage door opener on their Canyon or Colorado pickup trucks, even the most expensive models! Sad but true. This project uses the small inset in the dash some call the dash cubby.…
The tiny front pocket in the dash of the '15 and up Colorado is nearly useless. Even if you shove a wallet or garage door opener in there it'll slide right out if you hit the gas at all. This 'pocket dock' for phone or tablet gives it…
Seat lever for Isuzu D-max/Chevy Colorado The original lever was weak and broke. I printed the replacement in carbon fiber reinforced nylon for maximum strenght. The Fusion360 is included. Flip the model around depending on which seat,…
The frame of the 2023+ 3rd gen GMC Canyon AT4X / Chevy Colorado ZR2 with DSSV shocks has a tube used for the outboard mount on the passenger side. It is a catch-all for mud, rocks, and debris. I wanted to fix that, so I made a plug. I…
Hummer H3, 2004-2012 GMC Canyon/Chevy Colorado trucks do not have paper/fiber cabin air filters - just a mesh wire to keep large debris from entering the cabin air intake. This adapter allows you to add and quickswap a cabin air filter.…
Here is a custom Chevy Colorado coaster I made for a coworker.
Model generated using data from OpenTopography, processed through QGIS. United States Geological Survey (2021). United States Geological Survey 3D Elevation Program 1/3 arc-second Digital Elevation Model. Distributed by OpenTopography.…
A topological map of Colorado with a novel support structure. Cones are used for their strength. Since the supports stick out from the flat side, you can cleanly remove them with a chisel. If you want to be safer, something with a square…
Colorado Avalanche Oversized Necklace Logo that I designed. I hope you enjoy!
In the pictures supplied I used a color changing Filament to assist with the elevation display, and black base filament so that the recessed letters would be more visible. I wish I had an actual scale, but I shrank this down to…
This model is for printing the flag of Colorado. You can print this using only manual color changes at different layer heights. Start printing in Blue make switches to White, then Red and finally Yellow. The switches are at layers 19, 23…
This bracket is for the 3rd Gen Colorado/Canyon with the wireless phone charger. I found that my iPhone 16 Pro needs to be in the center of the charge pad to maintain charging. This should work for other finicky phones of similar size.…
Prsten dělaný podle předlohy
🏔 COLORFUL COLORADO ⛏ If you are from Colorado, a fan of the best US State flag, a vexillologist (look it up!), have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for…
Offroad Chevy Concept Model- a concept for a truck I'd like to build. The wheels spin :) Used base body from this model: https://www.printables.com/model/692030-2021-chevy-colorado-zr2/files Used this front bumper (with a couple…
This is a panel that replaces the card holder panel in a Chevy Colorado/GMC Canyon 2017+ models. I cannot confirm other models since I only have a 2017 Colorado WT. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Offroad Chevy Concept Model- a concept for a truck I'd like to build. The wheels spin :) Used base body from this model: https://www.printables.com/model/692030-2021-chevy-colorado-zr2/files Used this front bumper (with a couple…
Hockey pucks of Colorado Avalanche logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection: https://www.printables.com/@m_collectable/collections/2703845
2015-2022 Chevy Colorado Console tray with handle
Just a fun art piece for people who like colorado and want a relief of the whole state. Keep in mind this is small scale replica generated using topographical maps of the entire state so it doesn't have a whole lot of variation, so if you…
Colorado Rockies Keychain
Just a printed version of those goofy logos you see dangling around peoples necks from chunky plastic chains . This one of course is the Colorado Avalanche primary logo. I used a binder ring to attach it to the chain.
CU Boulder multipart / multicolor coaster. The design is set up for you to print pieces in different colors and then snap them together after printing. The bull horn prints with the base and thus would be the same color as the base. I…
The visor retainer on my truck cracked in half. This model is designed to replace the entire assembly and screws in place with the original screws. The visor should “click” in to the center hole and will hopefully be good and stuck in…
When you attach your phone in CarPlay mode you can't use it however you still don't want it rattling around in your console pockets. This case will friction-fit an OEM iPhone lightning cable and secure your phone in an easy-to-remove…
This is a small magnetic logo for the Colorado Avalanche. It fits 6x3mm magnets. About 24 mm x 28 mm.
Colorado Avalanche Keychain, foot logo
Colorado Buffaloes Coaster to put your drink on while watching the game
Multi-Layer Avalanche Logo If you have a multicolor printer, you can download the full .stl file and do your thing. For those who do not have a multicolor printer, like me, here is how I did it: Slice file Base with three colors: black,…
I remixed this to have a beefier cylinder/clip and a slant so that you can print is slanted for better layer line strength on that cylinder. Please consider checking out the video!
I wanted to try printing a multi-color print on my single extruder printer. To print this I lined up all the files in Cura (I uploaded the project file, All.3mf , if you want to try and just use that) The deleted all of the objects except…
Topography file downloaded from:…
This is an extended headlight dust cap for 2015-2022 Chevrolet Colorado or GMC Canyon pickups. It may also fit other GM vehicles but I can't guarantee it. This model has been remixed from a design by eizan70 on thingiverse . I removed a…
Colorado Rockies Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
This is a redesign of the mount by Kimosabi making it smaller and compatible with Garmin dash cam mounts. The Garmin Dash Cam Mini 2 needs to be mounted to an angled surface so I modified the design to allow this. The Dash Cam Mini 2 is…
I created this to allow a little more control on how much things slide around in the console in my 2024 Colorado. It's not perfect, but does fit snuggly. I know there is a slight gap in the one compartment and it juts out the side…
Here is the awesome looking Colorado Rockies Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. (Chain Used: https://makerworld.com/en/models/25960#profileId-639228…
This phone mount is designed to convert a handlebar phone mount to be used in a 2015+ Chevy Colorado. It conforms to the top pen to over stereo area and has a 1.25 inch tube on either the left or right side depending on which side you…
Two variants for clip with ring for the back of the Garmin Colorado 300. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.12 Infill: 20% Filament: 3DLine PET-G Natural Category: Outdoor & Garden
Raptor grille lights for the updated grill on a 2022 Chevy Colorado. There are two lenses for the inner and outer pair of openings in the grille. I used clear PC for the lenses. The lenses can be glued into the housings and the housing…
This is a plug/dust cover for the holes on the pickup bed of 2015 to 2020 model years Chevy Chevrolet Colorado. I printed mine in 95Sha TPU for an interference fit I put my logo on mine, but left the uploaded model plain without any…
This is a Colorado Flag Fridge Magnet Layer height .15 For the blade a pause is needed at 4.25 layer to put the magnet in 9.65 Change Filament White 10.10 Change Filament Blue 10.55 Change Filament Red 11.00 Change Filament Yellow 11.45…
If you travel into the State of Colorado, from any surrounding State, you will likely encounter one of these signs. They are built, erected, and maintained by the Colorado Department of Transportation and have been welcoming visitors for…
The model 3MF comes with 2 colors and you can either use the free MFM app to add elevation contour lines and hi-elevation color or try the presliced Plate Sliced .gcode.3mf files under “Download RAW/STL/CAD”. Triple/Quad color maps can be…
Colorado Avalanche NHL team golf ball marker (25mm diameter by 2mm height and a 10mm spike). Version available is embossed for SLA and single filament printer. Usage Place on the green to mark your golf balls location when it is in the…
Remix of Gwhunter0727's model. Used the base support and created a few lofts that matched my arm posture.
Colorado Mammoth Lacrosse Keychain 3mm height
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Print the base with supports and solid. I like to print it on a raft. Category: Accessories
I recently put a MaxMate tri-fold style tonneau cover on my ‘21 GMC Canyon and wasn’t pleased with how the rear of the cover wouldn't sit flat on the tailgate. Upon looking into it, I realized that the rear stake pocket of the truck is in…
Buddy of mine is a huge Colorado Avalanche fan so I made him a license plate frame. Nozzle .4mm Layer Height .2mm PETG for heat resistance
Hockey pucks of former Colorado Rockies hockey team. Alternate jersey for Avalanche. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
This is a simple frame I whipped up in OnShape for the Colorado Topographical Flag model here: https://www.printables.com/model/345656-colorado-topographical-flag I printed the original model at 35% X and Y and 70% Z for more pronounced…
Colorado Rockies Oversized Necklace Logo that I designed. I hope you enjoy!
Colorado Buffaloes Oversized Necklace Logo that I designed. I hope you enjoy!
Colorado Avalanche hockey puck with Colorado Avalanche logo on it ( actual size ) if you like the hockey puck I am working on making all the NHL teams I have a collection started so when I upload a new model I will put it in the…
Print Settings: Printed on a Ender 3 S1 Sunlu PLA+ (Blue and White) 20% infill 0.2 layer height No supports Pause at start of layer 14 (2.8mm) Color Change at start of layer 51 (10.20mm) Magnets I used:…
Designed a throw lever for a Barska Colorado 3-9x40 scope. I use this with a Daisy 880 shadow. I've created 2 versions for people to use, as I noticed the length of the longer lever was close to touching the stock end, so I really…
Something I threw together for the Colorado Springs 3d printer meetup at the Urban Steam Coffee Shop. I grabbed the logo from twitter account (google image search) in jpg format, converted it to svg using http://www.online-convert.com/…
Here's a pop socket cover of the Colorado state flag. As per usual, print it solid, with supports. Set the supports at 60% and grid. Set the distance from the top and bottom of the supports to the print to .15 mm. Glue all the pieces…
Needed a way to mount my phone. I have a magnetic mount but there's no flat area to mount a scosche magnetic mount. I also wanted the phone to be close to the 8" display. This wedge fits in between display and the AC controls and gives a…
A Colorado School of Mines key chain. You can change filament half way through to change color.
This is a whistle intended for use in Colorado community response to ICE presence. Whistles like this have proven to be an affective tool of alerting communities to ICE activity so that they can witness, document, and report to immigrant…
Colorado Rapids Oversized Necklace Logo that I designed. I hope you enjoy!
I wanted an OEM looking install of a Redarc TowPro trailer brake controller in my Chevy Colorado so modeled a dash panel for the remote and an under dash bracket for the control unit. This should work for any model TowPro trailer brake…
2015–2022 Chevy Colorado / GMC Canyon Ditch Light Mounts — Hood Hinge Bolt-On — Pair Custom-designed ditch light mounts made specifically for 2nd Generation Chevy Colorado and GMC Canyon trucks . These mounts install using the existing…
-Under stearing column UHF mount for XRS -GME switch spacer
I created this model after wanting something similar to https://www.printables.com/model/1070460-chevrolet-gmc-truck-phone-dash-mount . I created the mounting points the same and used the same ball adapter for my model. The spacers will…
WTF - Where's the Fish! Colorado license plate layout. Mounts on a wall or use the included stand to display on your countertop. (You can just cut the tab off the top if you are going to display on a countertop.) Two versions included,…
I was changing the CV axle seals on my 2010 Chevy Colorado/GMC Canyon and was having a hard time driving the new ones in evenly without damaging them. This fit the profile of them pretty well (got TRQ ones, but I imagine they'd work for…
Easy to print. Print with no supports. :)
Published at the request of someone on the ColoradoFans truck forum. https://www.coloradofans.com/threads/phone-mount-that-doesn%E2%80%99t-block-vents.439522/ . I did the design 3+ years ago, then revised for my current Pixel 7 Pro. I…
🛰 Satellite Over Colorado Mountains Design: A silhouette of the mountains with a tiny satellite or rover flying above (nod to Colorado’s aerospace industry). Nerdy Element: Engrave orbit paths. Why It Works: Connects Colorado’s geography…
I printed at 1x and 2x for my two different sized wreaths. White/Blue/Silver worked well to look right for Mines.
Chevy Colorado Lumbar Seat Knob Replacement (Durable Upgrade) Tired of your lumbar seat knob breaking? You’re not alone—these factory handles are known to fail. This replacement knob is a simple, solid fix to get your seat adjustment…
Yes, I printed it with a 0.6 nozzle and it doesn't look great. Also, good enough for now and when I have time I'll print again with a 0.2 for detail.
It's football season! Print this large-link Spirit Necklace to support the University of Colorado Buffaloes! Print Instructions: I printed everything in PLA with 0.20 mm layers, 20% infill and 3 perimeters. For the Buffs Logo, start with…
