Cabin air filter adaptor for 2004-2012 GMC Canyon or Chevy Colorado or 2005-2010 Hummer H3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There's no cabin air filter on these trucks. This adaptor allows you to install a paper filter
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 210
- Wydruki
- 1
- Wyświetlenia
- 1534
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
There's no cabin air filter on these trucks. There's just a big hole. This adaptor installs over the hole to allow you to install the included paper air filter. It includes the adaptor, one replaceable paper filter, and the bolt/nut/wedge that you can use for a quicker install with or without adhesive. Adhesive is not included.
Links to replacement filters that I've tested are in the description and comments of the video below.
To install it:
- Remove the windshield wipers
- Remove the trim underneath the windshield wipers
- Install this air filter adaptor using either adhesive (like silicone sealant, etc) or using the included bolt/nut that wedges in against the walls of the intake
If you use the v-nut and thumbscrew, you will need a ¼-20 halfnut (aka jam nut) and a ¼-20x1.5in hex bolt, preferably both stainless
Print Instructions
- You should use a higher temperature filament like PETG since vehicles can get extremely hot in the summer
- Make sure your bridge angle is 45º to prevent excessively long bridges