Cabin air filter adaptor for 2004-2012 GMC Canyon or Chevy Colorado or 2005-2010 Hummer H3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There's no cabin air filter on these trucks. This adaptor allows you to install a paper filter
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 210
- Makes
- 1
- Views
- 1,534
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
There's no cabin air filter on these trucks. There's just a big hole. This adaptor installs over the hole to allow you to install the included paper air filter. It includes the adaptor, one replaceable paper filter, and the bolt/nut/wedge that you can use for a quicker install with or without adhesive. Adhesive is not included.
Links to replacement filters that I've tested are in the description and comments of the video below.
To install it:
- Remove the windshield wipers
- Remove the trim underneath the windshield wipers
- Install this air filter adaptor using either adhesive (like silicone sealant, etc) or using the included bolt/nut that wedges in against the walls of the intake
If you use the v-nut and thumbscrew, you will need a ¼-20 halfnut (aka jam nut) and a ¼-20x1.5in hex bolt, preferably both stainless
Print Instructions
- You should use a higher temperature filament like PETG since vehicles can get extremely hot in the summer
- Make sure your bridge angle is 45º to prevent excessively long bridges