Somfy Situo 5 io Remote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Somfy Situo 5 io remote and similar
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original bracket that comes with these remotes is complete trash and after accidentally dropping pretty much every remote I have mounted in the house, I finally decided to make a proper holder so this will never happen again.
Will work with any Somfy Situo 5 io style remote variant that is shaped like the one shown in the picture.
For mounting use 2x 3 mm Spax screws (I re-used the ones from the original trash brackets) or similar (ø3,2 mm hole / ø7,2 mm countersunk, 25 mm screw distance).
Printed in Prusament Pristine White PLA
0,25 Balanced
3 perimeters
4 bottom, 4 top layers
15% Gyroid infill
Import the 3mf file as project and everything is ready to go, only adjust your printer and filament.