1 / 4
Fan Dust Hose Magnet Adapter - Snapmaker A350 Enclosure — zdjęcie 1
1 / 4

Fan Dust Hose Magnet Adapter - Snapmaker A350 Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tired of screwing and unscrewing when switching from 3D print to CNC on a Snapmaker A350 w/enclosure? Magnetize it!

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
1
Wyświetlenia
261
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Snapmaker A350T is an old beast that does everything: laser cutting&engraving, CNC, 3D printing. It does not excel with 3D prints though but I occasionally use it as is when most of the time I use it as a CNC machine and once tamed the old beast can achieve great things with wood, acrylic, polycarbonate...

When used as a CNC machine, I usually mount a dust collection 1. on the spindle module and 2. inside the enclosure through the hole that extract inside air when the fan is attached. Which requires screwing and unscrewing 4 M4 bolts each time.

Even if it is not such a pain, sometimes I have to quickly switch from 3D printer to CNC either ways. So I created this adapter.

It is made of 2 parts:

  • one that permanently attaches to the enclosure

  • another one that permanently attaches to the fan

So now when I want to place a dust hose into the enclosure, I don't have to unscrew the fan anymore... And putting the fan in place is a piece of cake too. Overall this simple design provides a lot of agility.

External parts:

  • ⌀ 6mm x height 3mm permanent cylindrical magnets x 16

  • M4 flat head screws & nuts x 8