Fan Dust Hose Magnet Adapter - Snapmaker A350 Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of screwing and unscrewing when switching from 3D print to CNC on a Snapmaker A350 w/enclosure? Magnetize it!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 1
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Snapmaker A350T is an old beast that does everything: laser cutting&engraving, CNC, 3D printing. It does not excel with 3D prints though but I occasionally use it as is when most of the time I use it as a CNC machine and once tamed the old beast can achieve great things with wood, acrylic, polycarbonate...
When used as a CNC machine, I usually mount a dust collection 1. on the spindle module and 2. inside the enclosure through the hole that extract inside air when the fan is attached. Which requires screwing and unscrewing 4 M4 bolts each time.
Even if it is not such a pain, sometimes I have to quickly switch from 3D printer to CNC either ways. So I created this adapter.
It is made of 2 parts:
one that permanently attaches to the enclosure
another one that permanently attaches to the fan
So now when I want to place a dust hose into the enclosure, I don't have to unscrew the fan anymore... And putting the fan in place is a piece of cake too. Overall this simple design provides a lot of agility.
External parts:
⌀ 6mm x height 3mm permanent cylindrical magnets x 16
M4 flat head screws & nuts x 8