Variable filament rack / filament stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
variable filament stand easy printing without supports cheap only requires PETG and wooden rods with a diameter of 20 mm
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 230
- Wydruki
- 1
- Wyświetlenia
- 1609
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Print:
PETG 3-4 perimeters, cubic or gyroid infill 20%
Shelves/rods:
diameter 20 mm
I recommend beech or oak wood (it has much greater strength compared to spruce or pine)
Dimensions:
are variable according to your needs, the picture shows sample lengths of my stand (adjusted to fit under the table)
Wheels:
I used the wheels that I had at the time (pin diameter 10mm, length 30mm), STP are included and you can adapt the model to the wheels that you currently have.
Connection:
For me, the best bonding has proven to be with Universal Contact Adhesive such as Pattex Chemoprén Universal or Epoxy Adhesives.
Pay attention to the total length of the stand, I recommend a maximum of about 1-1.5m
Bending strength decreases with the square of the length.
So if one meter beech rod can carry about 30-40 kg, a two meter can carry 4 times less, i.e. 7.5-10 kg.