Variable filament rack / filament stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
variable filament stand easy printing without supports cheap only requires PETG and wooden rods with a diameter of 20 mm
- Rating
- 5 / 5
- Likes
- 110
- Downloads
- 230
- Makes
- 1
- Views
- 1,609
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Print:
PETG 3-4 perimeters, cubic or gyroid infill 20%
Shelves/rods:
diameter 20 mm
I recommend beech or oak wood (it has much greater strength compared to spruce or pine)
Dimensions:
are variable according to your needs, the picture shows sample lengths of my stand (adjusted to fit under the table)
Wheels:
I used the wheels that I had at the time (pin diameter 10mm, length 30mm), STP are included and you can adapt the model to the wheels that you currently have.
Connection:
For me, the best bonding has proven to be with Universal Contact Adhesive such as Pattex Chemoprén Universal or Epoxy Adhesives.
Pay attention to the total length of the stand, I recommend a maximum of about 1-1.5m
Bending strength decreases with the square of the length.
So if one meter beech rod can carry about 30-40 kg, a two meter can carry 4 times less, i.e. 7.5-10 kg.