1 / 4
300x300 Build Area Printed Bed Attachment for Rolohaun SimpleCore Redux
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to up my size a bit from the stock 220x220, so the 310x310 bed needs new printed attachments.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
BOM:
Qty 2 - M4 Hex Nuts
Qty. 4 - M4 Knurled Nuts: https://www.mcmaster.com/90368A200/
--OR--
Qty. 4 - Silicone Bed Spacers
CR-10 Hotbed: https://a.co/d/25VRBL
Print Settings:
Material Used: Inland (Micro Center) PETG-CF
I just followed the Voron spec for this one:
Use PETG-CF or Better
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill percentage: 40%
Infill type: gyroid
Wall count: 4
Solid top/bottom layers: 5
Supports: NONE