1 / 4
300x300 Build Area Printed Bed Attachment for Rolohaun SimpleCore Redux
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to up my size a bit from the stock 220x220, so the 310x310 bed needs new printed attachments.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 33
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM:
Qty 2 - M4 Hex Nuts
Qty. 4 - M4 Knurled Nuts: https://www.mcmaster.com/90368A200/
--OR--
Qty. 4 - Silicone Bed Spacers
CR-10 Hotbed: https://a.co/d/25VRBL
Print Settings:
Material Used: Inland (Micro Center) PETG-CF
I just followed the Voron spec for this one:
Use PETG-CF or Better
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill percentage: 40%
Infill type: gyroid
Wall count: 4
Solid top/bottom layers: 5
Supports: NONE