Tronxy Crux Dragon Burner V8 Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting/Carriage plate for using the awesome Voron Dragon Burner toolhead on Tronxy Crux series printers.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Tronxy released the Crux 1S not too long ago, and the new tool head they used looked suspiciously like a Voron Dragon Burner. I asked Tronxy for the STL files(since the toolhead they ship is clearly printed), and they provided them. After some inspection, their toolhead is a full on clone of the Dragon Burner V8, with some very minor tweaks specific to the weird longer hot end they used(which looks to be a knockoff Bambu P1 series hot end). Being that it was obviously a clone(and without attribution to Chirpy/Voron), I asked politely for the STEP files. Tronxy, sadly, would not provide them to me, so I reversed engineered their mounting bracket from the STL, and changed it so that a standard Dragon Burner V8 toolhead would bolt right on without modification.
There are two versions:
Carriage plate without the top extruder mount hole for the M3 SHCS. (V1)
Carriage plate WITH the top extruder mount hole, recessed so that it doesn't interfere with the top carriage plate mounting screw. (V2)
This opens up a world of hot ends and extruders to the Crux series of printers, simply configure yours with the Dragon Burner Configurator and it should hopefully bolt right to this carriage plate.
The stock mounting for the Dragon Burner has a protrusion at the rear of the extruder mounting plate which is meant to mount to the X carriage plate. The Tronxy X-carriage plate has a screw right in the way, so I did not add this hole. Instead mounting with the two M3x35 screws that go all the way through the front fan shroud to the carriage plate(It has recesses for two m3x5mm nuts). If you want to switch it up and use heatset inserts, I provided the STEP, so have at it.
Update:
I was not satisfied with the design not being able to use the mounting hole for the extruder mounting plate, as removing the cowl would result in the whole extruder and hot end assembly coming with it. I have modified it so that it has a space for the M3 SHCS (10mm length should suffice), and is recessed so the top mounting screw for the carriage plate can still be used. I will leave both versions just in case someone prefers one to the other.