Liczymy pasujące modele…
CruxLink is a modular terrain-building system with removable floors and consistently aligned walls. The base tiles are compatible with OpenLOCK, which makes it easy to join them and pull them appart, and modular, allowing you to shape…
Key features Supports the original bolts and screws! Just as stiff as original (when printed correctly) Twice as heavy as original Easy to print without supports Tested print settings that work 3 perimeters 30%+ gyroid infill 0.2mm layer…
I have a TronXY Crux1 3D printer and the stock cooling fan duct is barely adequate to cool the prints and nowhere on the net where printable files to be found for a better one. So after some tinkering i remixed a fanduct wich was meant to…
Corner motor bumper for happymodel crux35. Print in TPU and zip tie on. I left a window for a 2nd zip tie but it deformed the TPU too much for me. Not sure if they help but added them since I busted motors on a different quad. Made from a…
This mount holds the Runcam Thumb Pro camera on the Happy Model Crux35. I'd recommend printing in TPU with the camera mount facing up with the large flat side down. Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No…
1-24-2025 UPDATE: I have uploaded a version 2 that only requires you print the file twice, no need for 3 pieces or supports. Weight of each piece comes in around 0.55g, so 1.1 grams for a mount that accommodates a fairly large range of…
Tough PLA is good PETG was bad And I recommend TPU
Angle 40°. Version with mount above the camera stands, and version to use 20 mm holes. I printed with TPU-like filament with supports. P.S. Have not tried to connect GPS yet, will need soft serial for extra UART. P.P.S. Official guide…
print it flat, no supports needed. Print 2 included versions: 35 degree hard mount 10-50 degree adjustable mount
Tronxy Crux 1 Fanduct, no need support.
Update: Added a logo to the lid This is a box to hold a crux taco (that's the black & white item in the photos, a small sanding block for climbers to help remove callouses). There's no reason the box can't be used to hold any other small…
Das Kabel muss verlängert werden. Ist ein bisschen Lötarbeit gefragt. Einfach die Originalschrauben von dem Sensor benutzen. "The cable needs to be extended. Some soldering work is required. Simply use the original screws from the sensor."
Spulenhalter für den Tronxy Crux 1. Ich habe das passende Gehäuse für den Filamentsensor gemacht. Siehe hier: https://www.printables.com/de/model/420847-filament-runout-sensor-tronxy-crux-1 "Spool holder for the Tronxy Crux 1. I have made…
TronXY crux 1 filament spool holder replaces the stock one for a more standard version, or if yours is damaged or missing you'll need longer screws for side mount or you can print the top mount adapter if you want to mount the spool on…
Modèle de remplacement pour tronxy crux1, impression en 0.2 le cylindre doit être imprimé a plat pour plus de solidité, en plus des pièces d'origine il vous faudra 2 roulements REF:608 (22x7x8) et 2 écrous M5 + 2 rondelles éventail M5.…
This is a filament holder mount for Tronxy Crux 1 I used in my review video. I prefer to mount the filament on the top of the machine for smoother feeding, also get rid of the bowden tube guide. But you have to extend the filament sensor…
Just a cross that I bought on a trip to Egypt
NOTICE: This does not work with 3.5" props, only 3". The 3.5" props interfere with the canopy. I looked for quad frames that would fit, or be easily modified to fit the 03 Air Unit while achieving CRUX35 flight times, but those do not…
After the bottom plate of my Crux35 frame from my 3.5” FPV copter broke twice in a row and I no longer had a replacement, I designed a compatible frame for the 3D printer. The dimensions are designed so that the stiffness of the arms…
I think the original hotend/extruder combo is kinda bad and my “hotend” broke. The adapter and raiser are designed by me. I printed the fanduct and raiser in petg and the adapter for the x-carriage in abs. The fanduct is a mod of…
The CRUX 1 is an excellent little printer, but could use a BL Touch as my bed was warped. I installed a glass bed, and an SKR Mini V3 into it, so a BL Touch is the next logical step as far as upgrades. This mount works well, you are…
The CPU factory fan inside the TronXY crux 1 is small, so it has to run full speed 24/7, which makes the printer fairly loud, by swapping a larger fan spinning at a slower speed, it makes it significantly quieter this mod adds about…
Mount for iFlight GP8 Category: 3D Printing
Fixed 20 Deg version. I will publish more fixed angle versions later. Print 2off flat using TPU no supports required. With rocksteady off some intermittent very slight vibration is present in the camera recording and feed. With rocksteady…
This spool holder slides over the top carrying bracket. A 5 x 40 mm self tapping screw is needed to join the 2 parts of the spool holder. I added “Spool Holder Base with Screws.stl” in case you prefer to use scews to attach the spool…
Parametric Box for the Happymodel Crux 3 1S Toothpick. Print from PLA or PETG. Screw length M3x30mm
This is a canopy based on the original for the Insta360 go. I'm sure it can be used for other micro drones (especially ones with the CrazybeeF4SX1280 ELRS FC). Printed with TPU. Make sure not do to layerhights over .2mm. I appreciate your…
stuck two files that already existed and came up with this conversion kit that holds the dji 03 cam and vtx in 1
Wallmount: PRint like ever you want Sideplate: Use TPU or something else flexible
Based on the STL files available from HappyModel https://www.happymodel.cn/index.php/2021/09/08/3d-printed-camera-holder-and-antenna-holder-for-crux35-crux35-hd/ Step files included for easy modification
This is a remix of: Fan Mount: https://www.printables.com/model/523356-tronxy-crux-1-fanduct BL-Touch Mount: https://www.thingiverse.com/thing:5790611 This setup is used with the shortened heatbreak and hotend that result form upgrading…
For a complete assembly, you need: Screw or bolt М4*40 - 1 pc. Nut bolt М4 - 4 pc. Bearing 608RS/6082RS - 1 pc. Pulley - 1 pc. Bushing - 2 pc.
Wenn es noch nichts gescheites fertig gibt muss man es sich eben selber machen ;-) Den Anfang hat " slaik13 " mit seiner Grundplatte gemacht, damit hat er freundlicherweise die einfache Möglichkeit geschaffen mit relativ wenig aufwand…
This is a top filament holder for Tronxy Crux 1.
This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…
A sleeve on the holder for smoother rotation of the filament coil when printing.
TronXY Crux1 bed handle simple handle for the bed of the printer, its a bit thin, but I didn't have much room to work with. unscrew the bed adjusting knobs and put the handle in place. (see pictures) PLA should be fine, but I'd recommend…
Remixed some of my paleolithic people to make some units for Grudge. What is Grudge? It’s a crunchy little (but still one-sheet) mini-agnostic narrative campaign that Ill Gotten Games is designing for their CRUX: Universal Wargaming…
This is the Version 3 of this model. Instead of being separate parts, the BL-Touch Mount has been integrated into the fan body. This improves the functionality of the BL-Touch, as the missing area of the bed mesh is now along the back of…
This is a simple remix that addresses a problem I experienced with the original STL. Whils I found the original improved on the stock duct by directing fan airflow to both sides of the print, the actual direction or air produced was…
Made this small adapter that you attach to the top of your Tronxy Crux1 underneath the handle in order to move the filament spool holder to the top of the machine. It keeps the handle unlike some other top mounted spool holders and…
This is a camera mount for the Runcam Thumb Pro Camera on a Happymodel Crux35. It protects the camera an provides a fixed camera angle of 25 degrees. Enjoy! Print Settings Printer: Self built Rafts: No Supports: Yes Resolution: 0,2mm…
25.4mm tiny whoop mounting pattern. Print in TPU. Mounting hole recess for socket head screw.
Tronxy Crux 1 adapter plate. Use this model to adapt other printheads for crux 1. For more info t.me/crux1ru
oops i forgot to upload the .step, the length issue is still around tho its like .2mm to long or something. This needs to be cut out of carbon fiber, it serves no benefits if its just 3d printed.
I edited a canopy for the crux3 to add a better antenna, and used a ufl to sma connector and a foxeer lollipop stubby.
antenna holder for crux35 aio fc
Hehe should fit any random flag with a 5.3mm shaft
Welcome to your next project! This is a set of 3 procedural crack climbing holds designed to create the perfect "crux" for your home climbing or bouldering wall. These holds feature a dynamic internal geometry that simulates real rock…
between v2 and v3, one is just shorter, and one prints at a offset angle. both seemed to work for me.
Addition of half wall and stairs to the CruxLink: Dungeon Tile System
Now you can install awsome The Impact printhead (https://www.thingiverse.com/thing:5567933) on you Tronxy Crux1. All you need is to print this plate and place 2x M3x4x4 hot melt insert nut.
Для печати использовал Pet-G. Перед установкой, дисплей нужно тоже снять. Для крепления платформы использовал стандартные винты. Дополнительно приобретал лишь угловой кабель для связи с хостом чтобы не портить внешний вид корпуса…
TronXY crux 1 Extra Tall Filament Spool holder needed a taller top mount for my modified hot-end, someone else may have a use for it, so here it is replaces the handle on top of the printer prints in two parts (mine is two different…
В моем случае Tronxy Crux 1 под управлением Klipper. Так же используется не родная материнская плата.
Hose guide to fit Specialized Crux frame and brake hose. May fit other frames. PETG seems like the way to go but whatever. Used a brim. There is a little bit of an overhang on the lip that prints a little messy but it is so small it…
This base plate mod is an evolution of the exisiting crux35 frame, with a bit more structure added. The exisiting v1 crux35 frame has a couple notable weakspots that were prone to break in a crash. This model aims to fix those issues.…
uses a creality style extruder & part cooling fan, and a 5015 blower fan for hotend cooling, the filament switch is taken out of the housing and mounted at the top, and the wires for it will have to be extended, im using a redlizard…
Just print it with nice colors and high quality and glue together. Can't wait to see, what you'll come up with :) Post a make, if you'll print it. I've used SBS for beige parts and PETG for central part. Maybe, it would look better if…
Still a WIP, but i will print it ASAP to see if everything is alright; Print main parts with PETG ,(or ABS if enclosed) Print the fanduct with ABS if possible You will need to print an adapter to use the bambu hotend (fixed on the remix…
To put it on top at the handle of the tronxy crux 1 - without screws Category: 3D Printer Accessories
Tronxy released the Crux 1S not too long ago, and the new tool head they used looked suspiciously like a Voron Dragon Burner. I asked Tronxy for the STL files(since the toolhead they ship is clearly printed), and they provided them. After…
Reworked the Happymodel STL to reduce vibrations. Print on the side for an easy print. One of the models have a built-in structure which helps in case your printer have poor bridging performances with TPU. Print Settings Printer: Custom…
Printed with 20% gyroid infill and 5 walls.
I've printed this in ABS with organic support and 0.2mm settings (with a 0.5mm nozzle). The STL is flipped so that the motor mounting pad is on the print bed. Similarly for the video shelf and battery tray. I tried to strike a balance…
Designed for 3D printing. Print Settings Printer Brand: Printrbot Printer: Play Rafts: Yes Category: Earrings
Tronxy Crux 1 base with pi zero mount, buck converter to convert the 24v to the 5v to the pi and a mount to the original fan. You wil need some m3 heat inserts and some m3 screws; Print with PETG but if you use your printer enclosed, use…
Adapter that replaces the stock Specialized Crux 5 top cap so you can use ENVE stems.
This custom visor washer is specially designed for Vega Crux helmets to provide a tighter, more secure fit for the visor. It helps prevent the visor from falling or loosening while riding, especially on bumpy roads or at high speeds.
Design Concept The Crux Planter features a unique, criss-cross pattern providing not only a visually striking design but also reducing material usage while maintaining structural stability. The use of vibrant red adds a lively touch to…
A little piece to hold batteries on my drone with a rubber band. Also includes a version that allows mounting a GPS.
To give space between GPS antenna and FC/VTX I added this GPS mount to the original antenna mount.
25.4mm tiny whoop mounting pattern. Print in TPU. Mounting hole recess for socket head screw.
This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…
Top Mount Spool for Tronxy Crux 1 use old one screws and aluminium mount, recomend use 100% infill for more strong holding Print Settings Printer: Tronxy Crux 1 Rafts: No **Supports:** No Infill: 100 Category: 3D Printer Parts
This is my version of O4 mount dedicated for Happymodel Crux35 frame. At allows to use O4 wide lens camera from Flywoo with this frame. Camera angle can be adjusted. You need some m1.4 mounts (usually delivered with Flywoo camera).…
![[WIP]CRUX1 E3Dv6 (optional Sherpa mini DirectDrive)](https://media.printables.com/media/prints/369454/images/3117437_b055b47a-058a-4468-bf3a-8ee81999f1df/img_20230115_160212.jpg)
