Heating Belt Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
too keep a heat band on my resin vat
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you find you need a way to keep your resin vat warm?
Do you find that all the forums suggest:
1.) Fermentation heating belt
2.) Digital Temp Controller
But they do not provide a method of securing the heating belt to your vat... perhaps they suggest fiddly tape? But we both know that's not good enough. Plus what a pain when you need to clean everything.
So I came up with a solution... Behold: the answer is ELASTIC!
Print four of a kind HeatCorners.stl (Orient like a V when printing)
get a hold of some 4mm elastic cord
a cord stop (or print one) [I happened to have an 8x8x20mm spring lying around]
string them through like beads on a long enough piece of elastic to make it around your vat
then place the heating element around your vat and these corners and cinch tight!
Also included is a Temperature Probe clip.
This whole setup ain't worth much if it doesn't get proper feedback.