Liczymy pasujące modele…
This is a fully functional RC excavator that takes advantage of the wonderous capabilties of 3D printers. It uses micro robotic development parts such as an ESP32 development board that can be programmed via the Arduino IDE, this model…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
NEW print-in-place tracked excavator available here ! OR join my Printables club and get it FREE ! Introducing the print-in-place excavator! This is a challenging print if your settings are not refined. Test your overhangs, clearances,…
Print-in-place and Articulated Surprise Egg #4 - Tiny Excavator 'Making of' video: Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock…
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: https://amzn.to/3lYflF9) , and you are ready for another 60 days of printing. As shown in…
Compatible with propeller shields: https://www.printables.com/pl/model/867950-dji-avata-2-propeller-shields Print with PLA , and secure with cable tie. 17.5 g each Note about left and right files: They are almost identical. After putting…
Recently I became interested in F1, so I decided to design some tracks with their elevation. They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are…
Pulled and converted the 3D model of the DJI avata 2. Very suitable to make mods or take dimensions!! Non printable at this moment due to complexity
This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit…
Toy excavator with moving parts. I used 2mm aluminum tig rod as the pivots. Tooth picks or filament may also work depending on the scale. It will need supports on parts of the track base and at the end of the main arm, all included in the…
As I had similar on my last printer I designed a bottom cover for Saturn Ultra 4 VAT. Top idea is mostly from Makerworld: https://makerworld.com/en/models/458761?from=search#profileId-366900. but to print in 1 piece on Voron 300mm and use…
World map (Robinson projection) with approximative elevation About 1.5m large Can be printed with every kind of settings. The one visible on the picture has been printed with a 0.6mm nozzle, 0.32 layer height, 2 perimeters, 5% gyroide…
Small excavator key chain made for the operators at work. After printing, the two parts will connect together with some even pressure and some rotating, try keep everything as straight as possible. looks good printed with the tracks black…
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
New and improved versions added Full versions are fixed! On the full versions, the ‘61’ goes to the front. On the quarters, any will fit on any corner.
Aus dem Remix von BanditFPVprints geremixt komplett umlaufend zusammengebaut mit Tinkercad. Ausdruck in TPU, Hält wie das Original auch ohne klebeband.
If you have any questions, complains, requests, or other comments, please let me know!
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
Compatible with bumper: https://www.printables.com/model/856904-dji-avata-2-bumpers Great for flying through the woods and using Turtle Mode on the grass. The shields look too short, but it's not a bug. It's a feature - guards stay in…
I would recomend making the faunel from petg or abs to make it more water tight, also use at least 4 perimeters and 35% infil , and add brim while making the funnel, for better finish it may be nessesary to add suport to the holding arm.…
🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…
Resin vat drainer for anycubic photon mono Summary Resin vat drainer Print Settings Printer: Voron 2.4 Rafts: No Supports: No Filament brand: PolyMaker Filament color: Black Filament material: PETG Notes: Resin vat drainer
Hello, this is an RC Excavator. Its intended to provide a fun entry level way to get hands on experience with some simple electronic components commonly found in robotics but if that's not your style you can also control it with standard…
A 3D printed strategy board game for up to four players. Game tokens for this model are compatible with Four-in-a-Row . How to Play Players take turns adding two tokens with their assigned color(s) into the board to create chains of their…
There are 6 varients, Goggles strap mount / Goggles strap mount easy print & versions with a cable tidy Belt mounts in standard and easy print (slightly wider clip.
In keeping with the frame design, a sleek solution to a problem you shouldn't have!
I found a few resin vat holders but none that would fit my Elegoo Saturn. I decided to make my own version and share it with everyone! Fitment is a little loose on purpose to accommodate the alignment bolts on the bottom of the resin vat…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
Use the original wide base with these new Saturn 4 vat holder and funnel files of this design. This remix uses the same 400mm long 2020 extrusion and mounting hardware (M5). The vat secures to the holder using the original thumb screw…
This is a remix of the great DJI Avata 2 bumpers from Kucici. I did make a slight modification which prevents having to use cable ties. I simply added a lip to the bottom support which allows the bumper to clip perfectly in place and is…
This is a model of the Valkyrie Shuttle from the Avatar series. It is made as a kit and does not require any glue. The model has several features: Openable roof door Movebale engine parts VTOL engines can rotate Openable back door…
I was looking for a model that was deep enough for an almost full resin vat and also had a wide enough base to grab onto the cured layer. I did not find one that I was happy with, so I created this in onshape. The model is not a blazing…
This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…
Bumper guards for DJI Avata 2, fits in original holes but you will need 4 longer screws M1.6x10mm. Printed with PETG 100% infill, 0.15 layer, without supports.
This is a small and simple triangle key for opening the outside door of an elevator shaft. As i did an internship at an elevator maintenance company when i was in highschool I know my way around an elevator reasonably well. Since i lost…
General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…
The Avatar 2 product has a very close distance from the ground to the sensor. So I think using my foot cover will be helpful.
I love what ProfessorBoots ( https://www.printables.com/@ProfJohnny_823077 ) has done for the 3D printing community. Please support ProfessorBoots for all of his work to make these models come to life. It does take hundreds of hours to…
Earrings of all the element symbols from avatar. Print instructions Layer height doesn't matter that much. Additional earhooks needed. Have fun!
Appa whistle, generates a high pitch noise.
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
Approximately 600mm long model of the CAT 395 excavator. The model has working tracks, a rotating floor, and a fully movable arm and bucket. The model is printed entirely in PLA with a resolution of 0.20 for the larger parts and 0.10 for…
Cut out the sock and heater from Said's model and pasted onto this version
To view updated version of this model please click here. There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST…
Elevated cat bowls stand with a 15° tilted design for raised food bowls, suitable for puppies, cats, and small dogs. The size of the stand is 150*140*150mm. This design is compatible with IKEA’s OFTAST Bowl.…
Made a Saturn 2 Vat Holder that is mounted to 2020 tslot extruded aluminum (pictured is 50mm, but 40mm is likely tall enough for most cases). Also included a funnel holder and base to mount to another surface. Since this is uses 2020…
This is a cover for the Elegoo Saturn 4 Ultra's vat. Print two lids and two dowels and glue together. There is only one lid model, print it twice.
Heatsink was completely reworked, collets were remade as close to original as possible. Since provided model was fused into one solid, E3 Collet is rough estimation according to drawings/photos. CAD is accurate to provided technical…
The elevation system to use with the basic tile to create different levels in your marble track. The sticks fit into the holes of the basic tiles and can be fitted either in; the ground plate, another basic tile or the spacer plate. The…
I made this model 9 months ago and converted it now for 3D printing. Hope you like it and IF YOU PRINT HER PLEASE POST IT! Thanks. Want to have a detailed look at the model? Here for 3D renders I printed her with a scale up of 390 percent…
Stand for the DJI Avata 2 drone. The stand allows you to connect the USB cable when the drone is on the stand
There are a few vat drain stands but non of them are like I wanted to have one. For this drain stand you need a 20x10 aluminium profile or a standard 20x20 with M5 nuts for this profile. For the M5s and M3 vat holder, a M5x40 screw is…
The Elevate Bit Imitation for Beyblade X The dimensions will vary slightly depending on the print orientation. It looks better with the tip up, and the burst balance is better with the tip down. The tips are slightly higher, so if you are…
Update: PFC, LCpl, and Sgt ranks have been fixed! I created these separate from the other ones because in a Gun Club, ya gotta have guns! Have fun with these for Hail and Fairwell gifts, Moto decor in your workplace, home or bedroom,…
I wanted to use the carbon pellets I had for the BentoBox v2 for the internal carbon filter and saw @TechwithKramer's model, but the model took almost 3-4 minutes just to slice in Orcaslicer/Bambu Studio and a staggering 2 hours+ to print…
A Vat for EDM Want to convert your Ender 3 into an EDM machine? We did. This 3D printed vat design mounts to the bed-leveling bolts of an Ender 3. It can be filled with distilled water without leaking. Gridinity This design is gridfinity…
This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…
UPDATES 2022-12-02 Released DRIP_TIP_V2 ; it really makes it easier to push air through, IMO. Print with threads facing up. Removed historical files. No one should be using those anyways. 2022-01-20 Released EXT_CHAMBER RC2 2022-01-19…
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
This is a resin vat drain stand for the Creality Halot One. It features a height-adjustable funnel holder, and the vat holder is height-adjustable as well. The locking knob holes are designed for heat-set threaded inserts, and the knobs…
Best possible passive cooling for the Charger and Batteries due to open Frame Design. Easy to print, due to seperate Parts. Use 25 M3x6mm Countersunk head Scews to assamble the Parts. The "mid" part must be printed 3 times.
Lego Duplo excavator digger bucket and arm piece with joints on each side. Not 100% accurate but fits. You can easily modify my models on onshape.com (they offer free tier with only public models), it's not that different software from…
From the cover created by Abody on Thingiverse, it is modified to work on a 230 x 230 mm printer, including a handle and printer name.
This is low poly airplane model I designed. ✈ It comes in 3 parts: The tail section, the fuselage + wings, and the stand. I recommend printing the tail section with the flat side on the build plate, supports are not needed for that part.…
Print 8 of these clips (or more) to attach a fermentation belt to your at. I recommend using some kind of plastic that handles heat well, so plan jane PLA might not be the best choice. Picture is ASA filament. Fermentation built I used…
This is a remix of Jimmi's “Elegoo Saturn Vat Holder”. I needed it to fit the Saturn 2. I made a few changes that better suited my needs. I redesigned the funnel to sit on top of the bottle so you can drain the full vat into it easier…
Der Ständer hebt das Notebook um ca 5cm an. Dadurch passt es besser zum zweiten Hauptbildschirm und ist ergonomischer. Darüberhinaus sorgt für bessere Luftzufuhr zum Notebook. Neben den beiden Seitenteilen besteht der Ständer aus zwei…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
These printable ranks can easily fit on the Prusa or Ender 3 printer. Note, the regular thickness on all of these chevrons is 5.50 mm, except for the specialist rank at 8 mm due to the emblem embossed on the top. Shout out to all my Hooah…
Pretty simple to print. 0.2mm layer height and I do three walls. You can mount it to the camera with screws (if you have some small enough) or glue. I prefer using glue and I haven't had any issues with it yet. I've printed it in TPU,…
This is a general purpose linear servo actuator (pusher style). Two sizes have been designed, for different space constraints and force outputs. These use continuous rotation servos which helps keep the cost very low. Off the shelf…
After a recent trip to the Nordschleife with my friends I wanted to create a small memento of the visit. This is a great item for anyones desk, mantle piece or wall. Just scale to the size that suits you and admire the elevation changes…
Simple remix of Zwoop's Mighty 8k cover, shrunk down to fit the Mini 8k and to fit on the Prusa MK3 bed in one piece. Current configuration requires a vat screw to be loosened/lifted when putting the cover on or taking it off.
Adapted texture for the Anycubic Kobra Neo print surface.
Description I wanted something that could elevate my MacBook Pro 13" while letting me close the lid. Many other “elevators” hooked onto the sides of the laptop, preventing the screen from closing. Version 1 : a simple rounded bar, width…
Can be swapped directly out with the original claw attachment pieces. Created to scoop more beans!
A lid for the vat of Anycubic Photon Mono M5s with a handle, suitable for smaller printers (printed on my X1C in PETG). The print is in 4 parts - left, right, handle, and center connection.
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
Ich habe eine Hartschale für die DJI Avata 2 entworfen. Grund dafür ist der sichere Transport speziell bei Reisen mit Koffer. In der originalen DJI Tasche oder ähnlichen Soft-Taschen ist die Avata 2 vor keinem Kofferband und Gepäckwerfer…
This crown was originally meant to be worn by the crown prince of the Fire Nation. In his youth, Prince Sozin gifted this to Avatar Roku as a symbol of their friendship before Roku went off to master the other three elements. Eventually…
Private 13 is a soldier themed custom part set for soozafone's Dummy 13 1.0 action figure. The set currently includes: Scar-L - The well known and versatile NATO rifle, now for Dummy 13 to wield Helmet - A custom head for Dummy 13…
If you are in need of a support for your VAT, check this out here ! Made myself a vat cover to block UV from slowly curing the resin staying in vat. Must be printed angled If you have normal buildplate. STL and .3mf for bambulab. Needless…
This is a fully assembled RC excavator in Fusion 360 using the original STEP files from Professor Boots. All components are constrained with functional joints (revolute and slider), allowing motion studies and kinematic analysis. The rear…
Greetings 3D Printing community, This is the CAD model of the popular and affordable Bambulab hotend derivative that uses a round radiator that can be mounted using groovemount or 4-bolt Dragon Hotend pattern. Despite being popular and…
Printed flat down with supports
As part of a project I undertook to DIY (design-it-yourself) a modular EggBot-style robot from scratch using some parts I had on hand, I decided to use T-slot 8020-style profile as my base to allow for adjustments. Two issues were…
Vento is a refillable activated carbon/ HEPA filter mod designed for the Prusa Core One. Simple to print, easy to install. It uses magnets and self-align to the exhaust fan opening with the help of m3 screws attached to the rear panel of…
My favorite tractor in a flexible format! What is a better name: The Flex-Cavator or the Flexi-Vator? Comment if you want more tractor designs.
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. WHAT IS IT A travel version of a marble boardgame. The games I have seen that use this board are Carbles, Aggrevation, Trouble, the Marble Game, Wahoo, and…
Print the parts flat, without support. I printed theml with PET plastic bottle filament : https://hackaday.io/project/185196-pullstruder-from-plastic-bottle-to-pet-filament But should work with PETG but PET is stronger. When printed bend…
Building Under Construction - Elevator Shafts - Part 2 Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new.…
Bicolor elevator buttons inspired by Luigi's mansion 3
This is a customizable Avatar-inspired keychain designed for easy and high-quality 3D printing. The model features bold, clean geometry and smooth surfaces, making it suitable for both single-color and multi-color prints. Multi-color…
Large model so you can scale down to your bed size or cut it up and make it as big as you want. I printed it in about 6 pieces to make a large wall décor piece.
This is to rest the Saturn 2 vat that will protect the FEP. This makes it easy to clean or just get out of the way. There are two versions - fancy and simple. The fancy has some raised corners to hold the vat a little better.
Adapter for dust extraction when pouring dry mixes into the container. It significantly reduces the amount of harmful dust when mixing, which not only keeps the site clean, but also protects the health of the master. There are two options…
