1 / 3
Nissan Xterra 4-way flat tow connector wire stowage (toolless usage) — zdjęcie 1
1 / 3

Nissan Xterra 4-way flat tow connector wire stowage (toolless usage)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A model assembly for securing a 4-way flat tow connector to a Nissan Xterra (2nd-gen) without tools (once installed)

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
178
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Description

Overview

Contains two assemblies with two parts each:

  1. Wire clamp (top & bottom part)

  2. Vehicle mount plug (front & back part)

The plug sandwiches a flat metal strut of the factory bumper through an existing hole and is fastened together with one machine screw and nut.

The wire clamp sandwiches tightly onto the 4-way flat connector tow wire group.

The two parts are fastened together using a clevis pin for toolless stowage and usage.

Goals

  • Toolless stowage/usage of the 4-way flat connector tow wire group (read: NO MORE ZIP TIES)

  • No reliance on flexing plastic (e.g., snapping pieces together)

  • No way to shake apart

  • No destructive modification to the vehicle or wire

  • Resilient enough to last underneath a car for years

  • Avoid metal-on-metal contact where significant rattling may occur

Required hardware

(all sourced from in-store at local hardware store)

  • [x1] 1/4 in. x 2 in. Zinc-Plated Universal Clevis Pin

  • [x1] 1/4 in. Zinc-Plated Hitch Pin Clip

  • [x2] #8-32 x 1/2 in. Round Head Machine Screw

  • [x2] #8-32 Machine Screw Nut

  • Recommended: piece of tape for easier initial installation

Showcased make info

  • Printer: Prusa CORE One

  • Nozzle: E3D HF ObXidian - 0.4mm

  • Prusament PETG - Matte black

  • Slicer: PrusaSlicer-2.9.4

    • 30% infill

    • 0.20mm STRUCTURAL print setting

    • Organic supports on PLUG but not WIRE CLAMP

Installation

Video

Text

  1. Plug

    1. Prep

      1. Insert [x1] nut into the fitted hex inset of PLUG BACK; recommended: secure it temporarily with a piece of tape

      2. Insert [x1] machine screw from inside the box cutout of PLUG FRONT through and towards the disc-shaped extrusion

    2. Installation

      1. Insert the PLUG BACK from behind the bumper strut so that the smaller-diameter protruding disc fits in the hole in the strut

      2. Insert the PLUG FRONT from the other direction of the bumper strut so the two parts are sandwiching it

      3. Screw the two pieces together firmly

  2. Wire clamp

    1. Prep

      1. Insert [x1] nut down the channel of WIRE CLAMP BOTTOM where it ends up centered in the part

      2. Insert [x1] machine screw into WIRE CLAMP TOP, the screw head should sit within the slight hole inset

    2. Installation

      1. Secure the 4-way wire group within the two posts of WIRE CLAMP BOTTOM

      2. Place the WIRE CLAMP TOP on WIRE CLAMP BOTTOM with the grip-dots facing each other, the posts of WIRE CLAMP BOTTOM should fit in the gaps of the "H" shaped WIRE CLAMP TOP

      3. Screw the two pieces together firmly, sandwiching the wire. Note: the screw will be in the middle of the four wires, separating so there are two on each side

  3. Usage

    1. Insert the WIRE CLAMP ASSEMBLY into the PLUG FRONT and fasten by inserting the clevis pin from the top and secure the clevis pin with the hitch pin clip. It may be necessary to rotate the plug to make enough space to insert the pin from the top

Tagi