Nissan Xterra 4-way flat tow connector wire stowage (toolless usage)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model assembly for securing a 4-way flat tow connector to a Nissan Xterra (2nd-gen) without tools (once installed)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Description
Overview
Contains two assemblies with two parts each:
Wire clamp (top & bottom part)
Vehicle mount plug (front & back part)
The plug sandwiches a flat metal strut of the factory bumper through an existing hole and is fastened together with one machine screw and nut.
The wire clamp sandwiches tightly onto the 4-way flat connector tow wire group.
The two parts are fastened together using a clevis pin for toolless stowage and usage.
Goals
Toolless stowage/usage of the 4-way flat connector tow wire group (read: NO MORE ZIP TIES)
No reliance on flexing plastic (e.g., snapping pieces together)
No way to shake apart
No destructive modification to the vehicle or wire
Resilient enough to last underneath a car for years
Avoid metal-on-metal contact where significant rattling may occur
Required hardware
(all sourced from in-store at local hardware store)
[x1] 1/4 in. x 2 in. Zinc-Plated Universal Clevis Pin
[x1] 1/4 in. Zinc-Plated Hitch Pin Clip
[x2] #8-32 x 1/2 in. Round Head Machine Screw
[x2] #8-32 Machine Screw Nut
Recommended: piece of tape for easier initial installation
Showcased make info
Printer: Prusa CORE One
Nozzle: E3D HF ObXidian - 0.4mm
Prusament PETG - Matte black
Slicer: PrusaSlicer-2.9.4
30% infill
0.20mm STRUCTURAL print setting
Organic supports on PLUG but not WIRE CLAMP
Installation
Video
Text
Plug
Prep
Insert [x1] nut into the fitted hex inset of PLUG BACK; recommended: secure it temporarily with a piece of tape
Insert [x1] machine screw from inside the box cutout of PLUG FRONT through and towards the disc-shaped extrusion
Installation
Insert the PLUG BACK from behind the bumper strut so that the smaller-diameter protruding disc fits in the hole in the strut
Insert the PLUG FRONT from the other direction of the bumper strut so the two parts are sandwiching it
Screw the two pieces together firmly
Wire clamp
Prep
Insert [x1] nut down the channel of WIRE CLAMP BOTTOM where it ends up centered in the part
Insert [x1] machine screw into WIRE CLAMP TOP, the screw head should sit within the slight hole inset
Installation
Secure the 4-way wire group within the two posts of WIRE CLAMP BOTTOM
Place the WIRE CLAMP TOP on WIRE CLAMP BOTTOM with the grip-dots facing each other, the posts of WIRE CLAMP BOTTOM should fit in the gaps of the "H" shaped WIRE CLAMP TOP
Screw the two pieces together firmly, sandwiching the wire. Note: the screw will be in the middle of the four wires, separating so there are two on each side
Usage
Insert the WIRE CLAMP ASSEMBLY into the PLUG FRONT and fasten by inserting the clevis pin from the top and secure the clevis pin with the hitch pin clip. It may be necessary to rotate the plug to make enough space to insert the pin from the top