Wii Motion-style mSata SSD to USB adapter enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wii Motion-style mSata SSD to USB adapter enclosure
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A fun enclosure for the NFHK mSata SSD to USB adapter, inspired by the Wii Motion design. I also created an additional Yoshi-themed design, as suitable colors were available. A STEP file is included in case you need to adjust the dimensions or create your own custom design.
Adapter dimensions may vary slightly, so small tolerances are built into the enclosure. If the adapter feels loose inside the case, I recommend adding a simple paper shim. The lid is secured using two flexible clips. If the lid does not hold firmly enough, gently heat the clips and slightly bend them toward the center.
My printer is not multi-color, so the print result looks a bit messy. In the photos, the enclosure has been sanded and coated with acrylic lacquer.
Printed with: PETG, layer height 0.2 mm, 4 perimeters, infill: 15% grid.
Print Settings:
Filament | PLA, PETG others not tested |
Layer Height | 0.2 mm or less |
Wall loops | at least 3 |
Infill | 15%, grid |
Top\Bottom shell | 4 |
Supports | for the fastening elements |
Brim | As needed (depends on bed adhesion), recomended - Outer |