Wii Motion-style mSata SSD to USB adapter enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wii Motion-style mSata SSD to USB adapter enclosure
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A fun enclosure for the NFHK mSata SSD to USB adapter, inspired by the Wii Motion design. I also created an additional Yoshi-themed design, as suitable colors were available. A STEP file is included in case you need to adjust the dimensions or create your own custom design.
Adapter dimensions may vary slightly, so small tolerances are built into the enclosure. If the adapter feels loose inside the case, I recommend adding a simple paper shim. The lid is secured using two flexible clips. If the lid does not hold firmly enough, gently heat the clips and slightly bend them toward the center.
My printer is not multi-color, so the print result looks a bit messy. In the photos, the enclosure has been sanded and coated with acrylic lacquer.
Printed with: PETG, layer height 0.2 mm, 4 perimeters, infill: 15% grid.
Print Settings:
Filament | PLA, PETG others not tested |
Layer Height | 0.2 mm or less |
Wall loops | at least 3 |
Infill | 15%, grid |
Top\Bottom shell | 4 |
Supports | for the fastening elements |
Brim | As needed (depends on bed adhesion), recomended - Outer |