1 / 3
Gridfinity bins for Teltonika RUTX11, or similar, antennas (WiFi + Mobile) — zdjęcie 1
1 / 3

Gridfinity bins for Teltonika RUTX11, or similar, antennas (WiFi + Mobile)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Custom Gridfinity bins to store Teltonika RUTX11 router (or similar) antennas horizontally.

I needed to organize my Teltonika router antennas in a drawer instead of throwing them loosely in a bin. Made the Mobile version first with approximate dimensions - it works but it's not perfect. The WiFi version came out much better with exact datasheet dimensions and deeper grooves.

Future improvement ideas: make them stackable, or match the Mobile depth to WiFi for a more polished look.

Mobile/4G Antennas Bin (5×2×2)

  • For 4x LTE/4G antennas (195mm × 13mm diameter)

  • Bin size: 209.5 × 83.5 × 17.5mm

  • Lip on one side for labeling

WiFi Antennas Bin (5×3×3)

  • For 4x WiFi dual-band antennas PR14RD35 (171.6mm × 18mm flat)

  • Bin size: 209.5 × 125.5 × 24.5mm

  • Balanced lip on both sides for labeling

Features

  • Cylindrical grooves hold antennas

  • Parametric OpenSCAD source included

  • No magnet holes = easy printing, no supports

  • 10-15% infill recommended

Requirements for .scad files (not needed for STL)

The OpenSCAD source files are parametric - you can adjust dimensions for different antennas. They require gridfinity-rebuilt-openscad framework: https://github.com/kennetek/gridfinity-rebuilt-openscad

If you just want to print as-is, use the STL files directly - no dependencies needed.

Print Settings

  • Layer height: 0.2mm

  • Infill: 10-15%

  • No supports needed

  • Material: PLA

Tagi