SKADIS/wall mount holder for 7-piece Wera VDE set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find a holder for my VDE set, so inspired by another project, I designed my own.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
This holder fits the Wera 05006480001 set and supports mounting on top of a Skadis board, anywhere on the board (via M4 hardware), or on a wall. The wall version is 5mm longer to ensure easier access to the tools. The screwdriver spacing matches the row of holes on the board.
Printing
Designed to be printed text-side up for the best quality and to allow for a color change. The 'On-Top' version requires supports, while the 'On-Wall' version usually does not.
Due to slight imperfections in bridging, the mount achieves a good, tight fit on the board.
Note: The screwdriver slots are designed for a loose fit; however, it might be tight depending on print accuracy or the specific manufacturing of the screwdrivers.
I have also included alternative versions without text that can be printed face-down without supports. The label area is 31 x 10 mm.
The total length is 280 mm, so it needs to be oriented diagonally on standard print beds. No special print settings required.