Frame for GUITION 5" Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple frame for the 5 inch GUITION ESP32-S3 display with a cutout for USB power
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple frame for the 5 inch GUITION ESP32-S3 display with a cutout for USB power.
The exact model of display i bought was this one: aliexpress.com/item/1005006715794302.html
The "Faceplate" comes in two variants: with and without a cutout for a light dependant resistor, aka LDR. The LDR might be handy to regulate the brightness automatically depending on ambient light. The last image shows this cutout, which roughly guides the LDR, if present. The thickness of the faceplate at the position of the cutout is 0.4mm so enough light can penetrate.
The four holes in the corners of the backplate accept 4 heat set inserts, which should be used to secure the display to the backplate. The backplate itself has 3 holes in the back for secure mounting with screws.