Märklin H0 modular Steel Girder Bridge Rail-C 188mm Straight Element (multi-part) / Märklin H0 modulare Stahlträger-Brücke Gleis-C 188mm Element gerade (mehrteilig)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Straight 188mm rail element of modular steel girder bridge system for H0 model railway. Great for "carpet"-railways.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
When building a temporary model railway bridge or ramp, you need pillars with various sizes.
Using Lego for this purpose did not look too realistic.
For this reason I designed a pluggable model railway pillar system, that allows you to create any pillar height you need.
For a more realistic look of a steel girder bridge, I designed a rail element for the straight Rail-C 188mm rails.
The elements fit on top of the modular Bridge pillar system and can be connected with snap-in-connectors.
The design leaves enough tolerance for the changing slopes needed for the bridge ramps.
The Märklin Rail-C system is intended to be used with for use with our design.
Printed with prusament PLA (Gentleman's Grey)
To build a complete ramp or bridge with ramps, you need quite a number of pillars and rail elements.
For one complete straight steel girder bridge Rail-C 188mm support element (multi part) you need to print the following components:
1x H0_Bruecke_gerade_188mm_Basis_v04.stl (base element)
(print orientation: upright)
(colour: Gentleman's Grey)
2x H0_Bruecke_gerade_188mm_AbdeckGitter_v04.stl (steel-grid left/right)
(print orientation: top face facing downwards, smooth or satin metal sheet)
(colour: Gentleman's Grey)
2x H0_Bruecke_Verbinder_v01.stl (snap-in-connector)
(print orientation: left or right side)
(colour: Gentleman's Grey)
Assembly
[Straight Rail-C 188mm Support Element complete]
The straight Rail-C 188mm rail support base element is printed as one part.
Then you need to place the steel-grid parts in the top side of the base element (left and right).
Simply place the steel-grid parts (left+right) in their related positions on the base element and carefully push in the snap hooks.
(the steel-grid parts are identical and do fit into their related position in any orientation with hooks facing down)
This gives a nice impression of a steel girder bridge construction.
The snap-in-connectors go into the small openings (left+right) at the ends of the rail support element.
The connected rail support elements fit on top of the pillar system.
The Märklin straight Rail-C element 188mm is simply placed in the center position.
Play & Enjoy!!!