1 / 1
Qidi Q1 Pro Filament Cutter 2 - Fixed PTFE Hole Alignment — zdjęcie 1

Qidi Q1 Pro Filament Cutter 2 - Fixed PTFE Hole Alignment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Remix to fix the PTFE tube hole alignment issue with the original "needssupport" version of this model.

Ocena
0 / 5
Polubienia
4
Pobrania
42
Wydruki
0
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Qidi Q1 Pro SLYCR2 filament cutter for the Qidi Q1 Pro.

This post is a quick fix to a problem with the "_needssupport" version, which had the PTFE capture/hole misaligned to the through hole. 🔘👈

The PTFE hole center was meant to be offset by 12mm when measured from the bottom/build plate.
I've edited the STL and uploaded it here until hopefully the original gets updated in the future.

  • Needs support version:

    • 4x20mm Spring

    • 5x20mm Spring

Model originally shared by @JS215_2044145 (Jeffery Strahan)

Happy Printing

Ghostcraft

Tagi