Qidi Q1 Pro Filament Cutter 2 - Fixed PTFE Hole Alignment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Remix to fix the PTFE tube hole alignment issue with the original "needssupport" version of this model.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 0
- Views
- 316
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Qidi Q1 Pro SLYCR2 filament cutter for the Qidi Q1 Pro.
This post is a quick fix to a problem with the "_needssupport" version, which had the PTFE capture/hole misaligned to the through hole. 🔘👈
The PTFE hole center was meant to be offset by 12mm when measured from the bottom/build plate.
I've edited the STL and uploaded it here until hopefully the original gets updated in the future.
Needs support version:
4x20mm Spring
5x20mm Spring
Model originally shared by @JS215_2044145 (Jeffery Strahan)
Happy Printing
Ghostcraft