1 / 2
UMAREX XBG / TDP magazine loader 4.5mm bb — zdjęcie 1
1 / 2

UMAREX XBG / TDP magazine loader 4.5mm bb

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is a loading kit with a big funnel for a umarex XBG magazine in 4.5mm /cal .177 BB

Ocena
0 / 5
Polubienia
2
Pobrania
34
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

This is a loading helper for the widely used umarex 4.5 (.cal177)  XBG BB gun. 

according to online information i found the mags fit into the UX TDP as well.

Print the funnel part standing on the wide ring and use a support (only from printbed) for the upper rest. 

Print the central part standing on the end were you put in the magazine (if you look through it from the side, its the end were the inner "hook" is more near). 

can be printed in PLA i guess, it doesnt have to endure much warping. 

i put in a stop part, that you slide over one end to prevent the mag from slinging out.

Tagi