1 / 6
Prusa XL Reinforced Double Silicone Wiper — zdjęcie 1
1 / 6

Prusa XL Reinforced Double Silicone Wiper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Double silicone wiper for Prusa XL, tube pegs reinforced with M2-12 screws, with placement guide and M4 screw mount.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
116
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked the double silicone wiper mods for my XL, but there was one major flaw. The pegs would always snap off during a print when there are many tool changes. I would examine and see all the broken pegs sitting on the bottom of the printer. Material didn't matter. 100% infill didn't matter. 

So, if you want things done right, you have to do it yourself. I wanted a couple of enhancements. 

  1. Single Screw to mount on the extrusion.

  2. A placement guide to make it easy to align.

  3. Some way to reinforce the pegs so they won't be breaking all the time.

I solved this issue by installing M2-12 screws into the pegs from the bottom. Now the pegs stay on, no matter how many times it gets hit by the nozzle. 

  1. Screw in the two M2-12 screws into the bottom of the wiper.

  1. The screws should be flush with the bottom.

  1. Add two cut silicone tubes to the wiper assembly.

  1. Secure with M4-10 screw and M4 T-Nut. Center the alignment guide as shown.

To cut the tubing, use this Cutter for ultimate Nozzle Wiper to cut it down to size.

Use PETG or stronger material , 15% infill and 0.20mm layer height to print this wiper. 

Tagi