1 / 6
Prusa XL Reinforced Double Silicone Wiper — image 1
1 / 6

Prusa XL Reinforced Double Silicone Wiper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Double silicone wiper for Prusa XL, tube pegs reinforced with M2-12 screws, with placement guide and M4 screw mount.

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
116
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked the double silicone wiper mods for my XL, but there was one major flaw. The pegs would always snap off during a print when there are many tool changes. I would examine and see all the broken pegs sitting on the bottom of the printer. Material didn't matter. 100% infill didn't matter. 

So, if you want things done right, you have to do it yourself. I wanted a couple of enhancements. 

  1. Single Screw to mount on the extrusion.

  2. A placement guide to make it easy to align.

  3. Some way to reinforce the pegs so they won't be breaking all the time.

I solved this issue by installing M2-12 screws into the pegs from the bottom. Now the pegs stay on, no matter how many times it gets hit by the nozzle. 

  1. Screw in the two M2-12 screws into the bottom of the wiper.

  1. The screws should be flush with the bottom.

  1. Add two cut silicone tubes to the wiper assembly.

  1. Secure with M4-10 screw and M4 T-Nut. Center the alignment guide as shown.

To cut the tubing, use this Cutter for ultimate Nozzle Wiper to cut it down to size.

Use PETG or stronger material , 15% infill and 0.20mm layer height to print this wiper. 

Tags