filament guide for tables and other platforms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
filament pass through guide
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
// UPDATE
allowing REMIX now
BOM added
I have run into an issue with the filament feeding system.
So I came up with this idea. You store your filament below or above your printer - on rollers or any other filament system - and you can run any filament (not TPU, I guess) from below or above to your printer.
The modell is 60 mm long. This is plenty and you can feed your filament better than with a shorter one.
Pay attention on the rollers you choose.
Be advised, the roll can get a 'little loose' but it will not unwind itself. This has been tested with 1 kg roll and and 2.3 kg roll on one printer for 12 months and another printer for roughly six weeks.
BOM
two IKEA Lack tables (or more, as you like)
8 mm drill
securely connect you tables with these stacking feet https://www.thingiverse.com/thing:1418251
Print settings:
PLA or whatever you fancy.
Use an 8 mm drill for the hole.