filament guide for tables and other platforms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
filament pass through guide
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
// UPDATE
allowing REMIX now
BOM added
I have run into an issue with the filament feeding system.
So I came up with this idea. You store your filament below or above your printer - on rollers or any other filament system - and you can run any filament (not TPU, I guess) from below or above to your printer.
The modell is 60 mm long. This is plenty and you can feed your filament better than with a shorter one.
Pay attention on the rollers you choose.
Be advised, the roll can get a 'little loose' but it will not unwind itself. This has been tested with 1 kg roll and and 2.3 kg roll on one printer for 12 months and another printer for roughly six weeks.
BOM
two IKEA Lack tables (or more, as you like)
8 mm drill
securely connect you tables with these stacking feet https://www.thingiverse.com/thing:1418251
Print settings:
PLA or whatever you fancy.
Use an 8 mm drill for the hole.