19" TP-Link ER605 Rackmount + 12-Port Keystone Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full-width rack mount option for an ER605 router, plus a removable 12-port keystone panel
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Modified Jimmi's 10" ER605 Rackmount design to suit a 19" full-width rack, with the extra space being used for a 12-port keystone panel. This panel is removable so you can remove or replace keystones without needing to un-rack the entire assembly.
Assembly:
Assembly will require 7x M3x8 screws (or longer), plus 7x square m3 nuts. Optionally M4 bolts can be used to fasten the router to the bracket but these shouldn't be necessary as it's quite a tight fit already.
Printing Advice:
The right half of the model is 268mm wide, but fits on the Prusa Mk4/Core bed when rotated. I recommend using paint-on supports to only apply supports to the inside of the keystone panel slot, like this:
Otherwise there will be support material inside the slots for the square inserts which will be very difficult to remove.