Centauri Carbon Hinge and Glass Holder Combined
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want your top glass holder and 270 degree hinge to be one piece instead of makeshifting both pieces, this is it!
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 141
- Wydruki
- 2
- Wyświetlenia
- 692
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want your top glass holder and 270 degree hinge to be one piece instead of makeshifting both pieces, this is it! Having both of these upgrades are great to have for the Carbon, but these upgrades conflict with each other, and other have used spacers and other things to make it work. You don't have to with this piece. It combines the lower 270 hinge and the right side glass holder. To complete this build, you'll see the recommended hardware hit from the hinge build, which is basically (2) M3x30 screws and M3 nuts. I didn't use the spacers, or brackets from the hinge print. You'll only need (5) printed parts. This new combined piece, left side holder, 2x hinge, and upper arm. This new piece actually improved the fitting for the plate holder. Good luck!