1 / 1
Centauri Carbon Hinge and Glass Holder Combined — image 1

Centauri Carbon Hinge and Glass Holder Combined

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you want your top glass holder and 270 degree hinge to be one piece instead of makeshifting both pieces, this is it!

Rating
0 / 5
Likes
21
Downloads
142
Makes
2
Views
696
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

If you want your top glass holder and 270 degree hinge to be one piece instead of makeshifting both pieces, this is it!  Having both of these upgrades are great to have for the Carbon, but these upgrades conflict with each other, and other have used spacers and other things to make it work.  You don't have to with this piece.  It combines the lower 270 hinge and the right side glass holder.  To complete this build, you'll see the recommended hardware hit from the hinge build, which is basically (2) M3x30 screws and M3 nuts.  I didn't use the spacers, or brackets from the hinge print.  You'll only need (5) printed parts.  This new combined piece, left side holder, 2x hinge, and upper arm.  This new piece actually improved the fitting for the plate holder.  Good luck!