Customizable Magnet Nameplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modern 50mm X 50mm X 7mm fridge magnet template. **THIS IS ONLY A TEMPLATE PLEASE EDIT THE NAME**PLease Like!
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 99
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
basic info
This is a 50mm X 50mm X 7mm customizable magnet with your very own name!
It is optimized for super easy and fast printing perfect for beginners. Depending on your name and 3d printer it will take 30 to 60 minutes.
customizability
to customize the name there are three options.
1. manually add it on any 3d design software you like - this is recommended for most people
2. go to the tally.so link enter your name and e-mail and i will edit for you - if you do not trust yourself (this may take up to 1 week for response)
print settings
Layer Height: 0.2 mm (0.16 mm for higher text detail)
Walls / Perimeters: 3
Top Layers: 5–6
Bottom Layers: 4–5
Infill: 15–20%
Infill Pattern: Grid or Gyroid
Print Speed: ~50 mm/s
Supports: None
Print Orientation: Flat on the build plate
buying magnet
this 3d model does not have magnets included but you can order the magnet from the amazon link or search for a 15mm circle magnet in nearby shops
licence
This model is for personal, non-commercial use only.
You may download, print, and customize it for yourself.
Selling, redistributing, or using the model or prints commercially is not allowed without permission from the creator.