Paint Shaker Ball Bearing Alternative (Mixing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed some metal balls to put in small containers of acrylic craft paint to mix them up. Most colors are fine but…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed some metal balls to put in small containers of acrylic craft paint to mix them up. Most colors are fine but the metallics are hard to mix. I needed around 7-8mm sized ball bearings but I only had 4.5mm metal balls (used in BB or air guns here in USA). So I made this holder with a shape that hopefully will make it take somewhat random paths. It holds 3 4.5mm balls and has a male and a female part. Use some super glue or similar to glue the two halves together after inserting the balls.
While this does seem to work, I also experimented with gluing 4 of the metal balls in a pyramid shape. Super glue worked okay for this but epoxy would likely be stellar and that would be a simpler way to solve this without wasting plastic.
Category: Tools