Paint Shaker Ball Bearing Alternative (Mixing)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed some metal balls to put in small containers of acrylic craft paint to mix them up. Most colors are fine but…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I needed some metal balls to put in small containers of acrylic craft paint to mix them up. Most colors are fine but the metallics are hard to mix. I needed around 7-8mm sized ball bearings but I only had 4.5mm metal balls (used in BB or air guns here in USA). So I made this holder with a shape that hopefully will make it take somewhat random paths. It holds 3 4.5mm balls and has a male and a female part. Use some super glue or similar to glue the two halves together after inserting the balls.
While this does seem to work, I also experimented with gluing 4 of the metal balls in a pyramid shape. Super glue worked okay for this but epoxy would likely be stellar and that would be a simpler way to solve this without wasting plastic.
Category: Tools
